Philips QC5090 - Инструкция по эксплуатации - Страница 10

The appliance and the adapter may only be cleaned with the brush 

supplied.

  1 

 Make sure the appliance is switched off and disconnected from the 

mains when you start cleaning it.

  2 

 Remove the comb attachment by pulling it off the appliance (Fig. 9).

  3 

 Push the middle part of the cutting unit upwards with your thumb 

until it opens and then pull it off the appliance (Fig. 10).

Be careful that the cutting unit does not fall to the floor.

  4 

 Clean the cutting unit with the brush supplied (Fig. 12).

  5 

 Also clean the inside of the appliance with the brush 

supplied (Fig. 13).

  6 

 Place the lug of the cutting unit into the slot and push the unit back 

onto the appliance (‘click’) (Fig. 11).

This appliance does not need any lubrication.

Replacement

A worn or damaged cutting unit should only be replaced with an original 

Philips cutting unit.

,

Push the middle part of the cutting unit upwards with your thumb 

until it opens and then pull it off the appliance (Fig. 10).

Be careful that the cutting unit does not fall to the floor.

,

Place the lug of the new cutting unit into the slot and push the unit 

back onto the appliance (‘click’) (Fig. 11).

Environment

,

Do not throw the appliance away with the normal household waste 

at the end of its life, but hand it in at an official collection point for 

recycling. By doing this you will help to preserve the 

environment (Fig. 14).

The built-in rechargeable batter y contains substances that may pollute 

the environment. Always remove the batter y before discarding the 

appliance or handing it in at an official collection point. Dispose of the 

English

10