Philips BT9295 - Инструкция по эксплуатации - Страница 8

 3 

 Start trimming where you want to define the edges of your beard 

and use the laser guide to guide you during trimming.

Tip: Hold the appliance so that the laser light shines exactly on the edge you 

want to trim and then place the trimming head on your skin.

 4 

 When you are finished, press the on/off button to switch off the 

appliance.

Tip: When the motor of the appliance is not operating, the laser guide switches 

off automatically within 3 minutes. In the 3 minutes before the automatic 

switch-off of the laser guide, you can use the laser guide to check if the 

contours of your beard are symmetrical or straight.

 5 

 Push down the top of the laser guide to lock it in ‘off ’ position 

(‘click’).

Trimming without comb

If you trim without comb, your hair is cut off close to the skin. The trimming 

head has a 32mm (1.25in) side and a 15mm (0.6in) side. The 15mm (0.6in) 

side of the trimming head allows more precise styling and contouring than 

the 32mm (1.25in) side.

 1 

 If one of the combs is still on the trimming head, pull it off.

Never pull at the flexible top of the comb. Always pull at the sides.

 2 

 Turn the trimming head until the side you want to use points to the 

front of the appliance.

English

8