HOTTEK HT-964-003 - Инструкция по эксплуатации - Страница 19

ENG

19

•  Set the detachable attachment comb (Pic. 6).
•  Push the switch to ON to turn on the hair trimmer.
•  Start to clip from occipitals and at the sides, then clip in the 

front  moving  to  the  crown.  All  the  movements  should  be 

performed against the hair grown direction.

•  Watch  the  speed  of  movement  of  the  appliance  when 

clipping.  The  best  results  can  be  achieved  when  the 

appliance  moves  with  its  internal  speed  without  being 

manually accelerated.

Warning:

 when clipping hold the trimmer properly (Pic. 7). Do 

not use the trimmer upside down.
•  The  final  treatment  should  be  performed  without  an 

attachment  by  light  stroking  movements  along  the  hair 

grown direction starting from the crown.

Warning!

•  The hair trimmer can continuously operate for 20 minutes 

maximum  in  order  to  prevent  from  overheating  of  the 

engine.  You  can  continue  operation  after  a  10  minutes 

break.

•  The appliance is designed for clipping dry hair; do not use 

it for clipping wet and soppy hair.

•  The power cord can normally get warm during charging.
•  Unplug  the  cord  when  operating  using  the  battery. 

Otherwise, it will result in discharging the battery.

Oiling

•  The blades should be oiled after every haircut.
•  Turn the appliance off using the On/Off switch (3). 
•  Apply  one-two  drops  of  oils  at  the  blade’s  teeth  and  back 

side of the top blade and then switch the unit on and make 

sure it is running smoothly.

•  Unplug  the  appliance  and  remove  surplus  oil  with  a  dry 

cloth.