First FA-5676-8 - Инструкция по эксплуатации - Страница 2

Машинки для стрижки First FA-5676-8 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 16
Загружаем инструкцию
background image

3

INSTRUCTION MANUAL

RECHARGEABLE HAIR CLIPPER

Please read this instruction manual carefully to 

use this appliance safely and to obtain the best 

results.

INTENDED USE

The hair and beard trimmer is designed for 

trimming and shaving natural hair and beards. 

It is intended for home use and not suitable for 

commercial use.

IMPORTANT SAFEGUARDS

•  Do not operate your clipper without oiling 

the blades.

•  Always switch the appliance off before 

unplugging the appliance after use and 

before cleaning.

•  Regularly inspect the power supply cord, 

plug and actual appliance for any damage 

if found damaged in any way, immediately 

cease use of the appliance and return the 

entire unite to the electrical appliances, 

Service shop for examination ask them to 

repair.

•  Do not place or store the appliance where it 

can fall or be pulled into water or any other 

liquid. Should the unit however, accidentally 

fall into water. Do not reach in to retrieve it 

until the unit is unplugged from the power 

outlet.

•  Do not use near bathtubs, basins or other 

vessels containing water. Do not switch on if 

wet.

•  The guide attachments and clipper should 

be kept clean at all times. Use the brush 

supplied to brush away any hair left on the 

cutting blades.

•  To avoid accidents, this appliance should 

never be used in the bath room or with wet 

hands.

•  Care must be taken to prevent it from falling 

and bumping, thus damaging the teeth and 

the machine. Keep the appliance dry.

•  This appliance can be used by children 

aged from 8 years and above and persons 

with reduced physical, sensory or mental 

capabilities or lack of experience and 

knowledge if they have been given 

supervision or instruction concerning use of 

the appliance in a safe way and understand 

the hazards involved. Children shall not 

play with the appliance. Cleaning and user 

maintenance shall not be made by children 

without supervision.

•  Do not use the clipper with a damaged or 

broken cutter or comb, or with teeth missing 

from the blades, as injury may occur.

•  This appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, 

or lack of experience and knowledge, 

unless they have been given supervision or 

instruction concerning use of the appliance 

by a person responsible for their safety.

•  Children should be supervised to ensure that 

they do not play with the appliance.

This appliance is only intended for household 

use.

SPECIFICATIONS

Lithium Rechargeable Battery

Rated Voltage: 

3.7 V

Charging time:  

150 minutes

Running time:  

180 minutes

Capacity:  

2000 mAh

Adaptor

Input:  

100-240 V 50/60 Hz

Output:  

DC 5.0 V 1 A

Power:   

5 W

NOTICES

Add the oil into the cutter head before use. 

(Check the picture for reference) The product 

body may be a little hot when using or charging. 

But it will not affect its performance.

Positions to add oil (one drip to each of the 5 

positions)

•  Add the oil to the positions as directed by 

arrow.

•  Don’t use petrol, alcohol, thinner to clean the 

product. Otherwise, the product color may 

be changed then.

•  Use diluted soap water to clean the product.

•  Don’t charge the product if the room 

temperature is higher than 40 or lower than 

0.

•  Keep it out of the reach of children to avoid 

cutting by clipper blade or swallowing its 

small parts.

PARTS NAME 

(fig. 1)

1.  blade

2.  on/Off switch with 2 speeds

3.  cutting size selection

4.  charging base, this product can be charged 

by base and directly

5.  attachment 

6.  oil

7.  cleaning brush

CUTTING SIZE ADJUSTMENT

Choose the suitable size you will need 

(3/6/9/12 mm)

Match it with the blade at the same level and 

then assemble

Take it out by pushing one side of comb by your 

thumbs (fig. 2)

CHARGING METHOD

Direct charging, charging by base

•  Put the adaptor connector terminal into the 

base.

•  Make sure the product is in the position of 

Power Off and then put it into charging base. 

The LED light will show a fixed red color. 

•  Charging time is around 3.0 hours.

•  When the charging is finished, the LED light 

will show a flashing white color.

•  If using charging base, please connect the 

adaptor with the base and then plug into the 

socket - the blue charging indicator will be 

working on the base. Then put the product 

into the base to start the charging.

•  Warning! Don’t take the adaptor out from 

the socket by wet hands to avoid the risk of 

electric shock.

CHARGING NOTICES

Notes: 

If the product not being used for a long 

time, please ensure the batter charged at least 

one time within 3 months to avoid damage. 

Plug-and-play function means that you can use 

the product while charging in case of insufficient 

power.
•  Put the adaptor connector terminal into the 

port of the product and then plug into a 

socket. Switch on the product and then use 

it.

•  After using, switch off and then disconnect 

the adaptor connector with product.

•  If the battery has been used out, it may 

be difficult to start the product even if 

it is plugged. You should restart it after 

charging at least one or two minutes. While 

charging, the product body and the adaptor 

may be a little hot, however, it is a normal 

phenomenon.

•  Take the adaptor out from the power socket

•  Take the plug out from the product

   Please hold the plug and take it out.

 

Don’t pull the cord in order to avoid any 

damage for adaptor.

•  Don’t charge the product more than 6 hours 

each time.

THE CUTTING HEAD DISASSEMBLING & 

ASSEMBLING

Disassembling 

(fig. 3)

Use another hand to hold the cutting head to 

prevent falling out.

Assembling 

(fig. 4)

1.   Insert A into B. 

2.   Turn the control knob into the position of 

2.0mm.

3.   Press it until a click sound.

CUTTING HEAD CLEANING 

(fig. 5)

Clean the left hairs in cutting head (fig. 5a)

Hold the moving blade base and clean the left 

hairs (fig. 5b)

Clean the left hairs in product body (fig. 5c)

Put a drip of oil to each circles (fig. 5d)

WARNING!

•  Don’t take the adaptor out from the socket 

by wet hands to avoid the risk of electric 

shock.

•  As soon as the charging is finished

•  Take the adaptor out from the power socket

•  Take the plug out from the product

•  Please hold the plug and take it out. Don’t 

pull the cord in order to avoid any damage 

for the adaptor.

•  Don’t charge the product more than 6 hours 

each time

•  Otherwise, the life time of battery will be 

reduced.

DISPOSAL

Protect the environment

This product contains a permanently in-built 

Lithium rechargeable battery. Do not dispose 

the battery or the device with normal 

household refuse, contact your local council 

to find out about environmentally friendly 

and proper disposal of the device(as electrical 

scrap) observe the applicable local and national 

disposal regulations with regard to separation of 

materials, waste collection and recycling centre.

ENGLISH

ENGLISH

2

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к First FA-5676-8?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"