Магнитолы VITEK VT-3470 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
8
CARE AND MAINTENANCE
COMPACT DISC CARE
•
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny,
unprinted side of the disc.
•
Do not attach adhesive tape, stickers etc., to the disc label.
•
Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive cleaners to clean the disc. If
necessary, use a CD cleaning kit.
•
If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched). When cleaning the disc,
wipe in straight lines from the center of the disc to the edge of the disc. Never wipe in circular motions.
•
To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by
the edges.
•
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth.
•
Unlike conventional records. compact discs have no grooves to collect dust and microscopic debris so gently wiping with
a soft cloth should remove most particles.
TAPE HEAD CLEANING
The tape heads, pinch roller and capstan require periodic cleaning. This removes particles of the metal oxide coating that
wear off the tape and accumulate on these parts and impair performance. Switch off the
power, press the Stop/Eject Key to open the cassette door, and press the Play Key. Clean the tape heads, pinch roller and
capstan with a soft cloth or cotton swab dampened in isopropyl alcohol or special tape head cleaner.
NOTE: Never use any metal objects on or near the tape heads. Do not allow any cleaning material to fall into the tape assem-
bly.
CLEANING THE UNIT
•
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
•
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use caution when cleaning and
wiping the plastic parts.
•
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays on the cabinet.
•
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampened with a
mild soap and water solution. Never use abrasive cloths or polishes as these will damage the finish of your unit.
Caution:
never allow any water or other liquids to get inside the unit while cleaning.
ENGLISH
3473.qxd 27.06.2005 12:14 Page 8
