VITEK VT-3467 BK - Инструкция по эксплуатации - Страница 5

ENGLISH

5

Always close the disc compartment lid to prevent 
dust getting into it. Always take out the disc from the 
compartment, if it is not being played.

1.  Switch on the unit.
2.  Select the CD discs playback mode. Set the 

FUNCTION

 switch to 

CD/ MP3

. 

3.  Open the disc compartment. Insert a disc and 

close the compartment lid. Make sure that the 
disc is inserted properly – the label upwards. 

4.  The “---” symbol will appear on the LCD-display 

for several seconds, and then number of the 
tracks will appear on the LCD-display. 

5.  To start the playback, press the

 PLAY/PAUSE 

button.

Playback

In the playback mode press the 

PLAY/PAUSE 

but-

ton, the playback of the disc will start.

Pause

To pause the playback, press the 

PLAY/PAUSE

button in the playback mode.  
To resume the playback press the 

PLAY/PAUSE 

button once again.

Stop

To stop playback, press the 

STOP 

button. The 

number of the tracks will appear on the LCD-dis-
play. 

Moving to the beginning of the track, to the next 
and to the previous disc

1.  To move to the next/previous track, press the 

/

 buttons once.

2.  To quickly move to the necessary part of the 

played track, press and hold the 

/

 buttons 

correspondingly.

Selecting album

You can select the necessary album, pressing the 

FOLDER+ 

button.

Note

: After all the tracks on the disc are played, the 

unit will stop the playback automatically.

Repeat playback of a disk or a track

1.  To repeat one track, press 

MODE/PROG 

once, 

“REP” will appear on the LCD-display.

2.  To repeat one album, press the 

MODE/PROG

button twice, “ALBUM” will be flashing on the 
LCD-display.

3.  To repeat all tracks on the disc, press the 

MODE/

PROG

 button thrice, “REP ALL” will appear on 

the LCD-display.

Random playback

1.  To playback all tracks on the disc in a random 

order, press the 

MODE

 button four times in the 

stop mode, “RANDOM” will appear on the LCD-
display. Press the 

PLAY/PAUSE

 button, random 

playback of the tracks will start.

2.  To cancel random playback, press the 

MODE 

button once again, “RANDOM” will disappear 
from the LCD-display.

PROGRAMMING THE PLAYBACK

You can program playback of tracks in the desired 
order. 
1.   When the playback is stopped, press the 

PROG 

button once. The number of the track while pro-
gramming “P01” will be flashing on the LCD-dis-
play

2.   Select the desired track, consequently pressing 

the 

/

buttons. 

You can select the necessary album or move 10 
tracks forward by pressing the 

10+/FOLDER+ 

button.

3.  To store the selected track, press the 

MODE/

PROG

 button once again. The number of the 

track will change to “Р02”».

4.  Programming of the following track: select the 

next track, consequently pressing the 

/

but-

tons. Then press 

MODE/PROG

 to store the de-

sired track in memory. 

5.  To playback the programmed tracks, press the 

PLAY/PAUSE 

button.

6.   To cancel the programmed playback, press the 

STOP

 button twice or open the disc compart-

ment lid, or set the 

FUNCTION

 switch to another 

position.

7.   After all the programmed tracks are played; the 

unit will stop the playback automatically.

When the list of 20 stored tracks is full, “---” will be 
flashing on the display for several seconds.
During the programmed playback to repeat one 
track press the 

MODE/PROG 

button, the “REP” 

symbol will be flashing on the LCD-display, to repeat 
all tracks on the disc press the 

MODE/PROG 

button 

once again, the “REP ALL” symbol will be flashing on 
the LCD-display.
To stop the repeated playback, press the STOP

but-

ton.

TROUBLESHOOTING GUIDE

Improper usage is always the case of trouble. If you 
consider that there is something wrong with the unit, 
check possible causes in this table.
If you have not managed to solve the problem, apply 
to the nearest authorized service center.

3467IM.indd   5

3467IM.indd   5

19.08.2010   14:26:27

19.08.2010   14:26:27