Telefunken TF-SRP3471B - Инструкция по эксплуатации - Страница 4

4

Instruction manual

4

Headphone connection

• For private listening, insert 3.5 mm 

headphone into the stereo headphone jack. 

• Adjust volume control to the appropriate

level as desired.

• When the stereo headphone jack is

plugged, speaker will disconnect automatically.

Radio operation

• Press repeatedly MODE button until the

display shows FM.

• Press and hold

 button or 

 button; 

the fast scanning starts. The frequency will 
continue to change and will automatically stop 
when a broadcast station is received. 

• To receive a weak broadcast signal shortly

press 

 button or 

 button and adjust the 

frequency you wish to receive step-by-step.

Saving stations to memory

• In radio mode, press and hold PLAY/

PAUSE button, the unit will search and save all 
available radio stations.

• Press PRE.+ or PRE.- to cycle through the

all saved stations.

Antenna

• For FM reception, adjust the telescopic

antenna appropriately to obtain the best 
reception on the band selected.

USB/SD operations

Playback

• Turn on the device

• Insert a USB device into the USB port or

SD card into the slot. The unit will switch to 

USB/SD mode automatically and the USB/SD 

icon will show in the top of the display. Or, if 

afterwards you selcted another mode, press 

MODE button repeatedly to select USB/SD 

mode.

• Playback of the first track will start

automatically. The display will show PLAY icon 

in the top and the number of the track.

• Press PLAY/PAUSE button to pause

playback. Press the button again to resume 

playback.

• Press repeatedly

 button or 

 button 

to go to next or previous track. Press and 

hold 

/

 buttons for backward or forward 

searching; release the button for normal 

playback.

• Press ALBUM+/ALBUM- buttons to select

next or previous albums or folders.

• Press and hold the MODE button once

to repeat the currently playing track. Press 

and hold the MODE button twice to repeat the 

whole album/folder.

General USB/SD notes

  According to the USB 1.1/2.0 Standard, 

usage of a USB device with power current 

consumption exceeding 500 mA is not 

recommended without supplementary power 

supply. Failure to use supplementary power for 

connected USB drives with power consumption 

exceeding this value as well as defective 

USB drives may cause mechanical or thermal 

changes of elements of this unit as well as 

failure of internal elements of the USB port. 

Such damages are not warrantee cases.

Warning: usage of external USB drives 

containing BIN files in the root directory may 

cause malfunction of the unit or damage to the 

software.

• This unit is equipped with a USB socket

that can accept and play MP3 files stored on 

standard USB flash (2.0 version)/SD cards up 

to 32 GB.

• FAT and FAT32 file system are supported

by this unit.

AUX jack

You can connect the audio output of an 

external device to this unit, to listen to the sound 
of that device through the speakers of this unit.

• To connect an external audio device,

please use a standard audio cable with 3.5-mm-
to-3.5 mm plugs (not included) to connect the 
headphone out or audio line-out of the external