Telefunken TF-SRP3461B - Инструкция по эксплуатации - Страница 5

5

Instruction manual

5

General USB/SD notes

  According to the USB 1.1/2.0 Standard, 

usage of a USB device with power current 

consumption exceeding 500 mA is not 

recommended without supplementary power 

supply. Failure to use supplementary power for 

connected USB drives with power consumption 

exceeding this value as well as defective 

USB drives may cause mechanical or thermal 

changes of elements of this unit as well as 

failure of internal elements of the USB port. 

Such damages are not warrantee cases.

AUX jack

Warning: usage of external USB drives 

containing BIN files in the root directory may 

cause malfunction of the unit or damage to the 

software.

You can connect the audio output of an  

external device to this unit, to listen to the sound 
of that device through the speakers of this unit.

• To connect an external audio device, please
use a standard audio cable with 3.5-mm-to-3.5
mm plugs (not included) to connect the headphone
out or audio line-out of the external device to
the AUX input socket of this unit.

• Press FUNCTION button repeatedly to select
AUX mode; AUX icon will be displayed.
• Turn on the external device. You cannot control

playback with the buttons of this unit except

adjusting the volume.

• This unit is equipped with a USB socket

that can accept and play MP3 files stored on 

standard USB flash (2.0 version)/SD cards up 

to 32 GB.

• FAT and FAT32 file system is supported by

this unit.

Bluetooth operation

Bluetooth wireless playback

• This unit can wirelessly playback audio

from any device with Bluetooth A2DP 
function.

• The wireless range is approximately within

10 meters.

• Wireless audio streaming requires pairing

of a Bluetooth device (e.g. smartphone).

HOW TO PAIR YOUR DEVICE TO THIS 

UNIT:

•

M

ake sure the Bluetooth function is

switched on in your device (e.g. smartphone, 
tablet).

• Switch on the unit and press the

FUNCTION button repeatedly until 
the display shows BT.

• You will find the unit listed in the

Bluetooth connections list of your device (as 
TF-SRP3461B).

• If asked for a passcode, enter “0000”
• The initial setup is required only once

per device. 

• After a successful pairing, you can

control the playback of audio files as 
described in the USB/SD operation section.