Soundmax SM-CDM1058 - Инструкция по эксплуатации - Страница 17

17

Radio operations

Band selection

Press  repeatedly  BAND  button  on  the  RC  or  BND  button  on  the  panel  to  select  your  desired  radio  band  in

radio mode: FM1, FM2, FM3, FM4 (OIRT), MW1 (AM1), MW2 (AM2). Each band can store 6 preset stations,

for a total of 36 preset memory stations.

Tuning

Press

 or

 button; the unit will automatically search a nearest station with a strongl signal. To search

next station repeat this procedure. To stop the automatical search, press

 or

 button.

Press and hold

 or

 button to activate manual search mode (MANUAL will be displayed). Press

 or

buttons repeatedly to search for a station manually. If you don’t press any button within several seconds,

the unit will return to auto search mode.

Automatic store/Scan

Automatic store: Press and hold AMS button, the receiver will automatically find and save stations for the

current band.

Scan: Press AMS button once to scan the saved stations in 3 FM bands, OIRT band or 2 MW bands.

Programming stations

There are six numbered preset buttons on the RC and on the front panel, under which you can store and

recall stations for each band. Select the needed station, then press and hold a preset button. The station will

be saved in the memory under the corresponding number. To recall a stored station, press the corresponding

preset button.

Mono/Stereo control (in FM radio mode)

Press SEL button repeatedly until the display shows STEREO (MONO). Rotate VOL regulator or press VOL+/-

buttons on the RC to switch between STEREO reception and MONO reception. Improvement of reception of

distant stations can be done by selecting mono mode, which may cut down some reception noise.

Local radio station search