Магнитолы Soundmax SM-CDM1041 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
12
General operations
Power button
Press any button (except OPEN) or insert disc to switch the unit on. Press the POWER button to
switch the unit off.
Volume control
Rotate the VOL knob on the front panel to adjust volume level.
Audio settings adjustment
Press SEL button until the display shows: VOL => BAS => TRB => BAL => FAD. Rotate the VOL
knob to adjust each mode.
Press SEL button for 2 seconds to enter the menu mode. Press it repeatedly to choose the needed
item: TA SEEK/ALARM => PI SOUND/MUTE => RETUNE L/S => MASK DPI/ALL => BEEP
2nd/ALL/OFF.
TA (Traffic Announcement) mode
To determine what action will the radio take if the newly tuned station does not receive TP
(Transport Program) information for 5 seconds. Rotate the VOL knob to select the desired mode:
TA ALARM and TA SEEK.
-
TA SEEK
When newly tuned station does not receive TP information for 5 seconds, the radio retunes to
next station which has not the same station (PI – Program Information) as the last station, but
has the TP information. When TP information gets lost at the current station for retune time
which is set by RETUNE SHORT (30 seconds) or RETUNE LONG (90 seconds), the radio starts to
retune to next same PI station. When same PI station does not catch in 1 cyclic search, the
radio retunes to next station with TP information.
-
TA ALARM
During searching the radio does not retune but the double beep sound (alarm) is output.
PI SOUND/MUTE
