Soundmax SM-CCR3034 - Инструкция по эксплуатации - Страница 14

14

Radio operations

Band selection

Press  repeatedly  LOUD/BAND  button  to  select  your  desired  radio  band  in  radio  mode:  FM1,  FM2,  FM3,  FM4

(OIRT),  MW1  (AM1),  MW2  (AM2).  Each  band  can  store  up  to  6  preset  stations,  for  the  total  of  36  preset

memory stations.

Tuning

Press PREVIOUS or NEXT button; the unit will automatically search a nearest station with a strong signal

down or up the range and it stops when finds a station. To search next station, repeat this procedure. To

stop the automatical search, press PREVIOUS or NEXT button.

Press and hold PREVIOUS or NEXT button until MANUAL is displayed. Then press PREVIOUS/NEXT buttons

to change the frequency manually step by step.

Automatic store/Scan

Automatic store:  Press  and  hold  AMS/SCH  button,  the  receiver  will  automatically  find  and  save  6  strong

signal stations for the current subband.

Scan: Press AMS/SCH button once to scan the saved stations in each subband of the current band.

Programming stations

There are 6 numbered preset buttons, under which you can store and recall stations for each band. Select the

needed station, then press and hold a preset button. The station will be saved in the memory under the

corresponding number. To recall a stored station, press the corresponding preset button.

Mono/Stereo control (in FM radio mode)

Press repeatedly SELECT button until the display shows STEREO (MONO). Rotate VOLUME regulator to select

between STEREO or MONO. STEREO means stereo reception of the signal; MONO means mono reception mode.

Improvement of reception of distant stations can be done by selecting mono mode, which may cut down some

reception noise.