JVC KD-S1501 - Инструкция по эксплуатации - Страница 11

11

ENGLISH

What you can do with RDS

RDS (Radio Data System) allows FM 
stations to send an additional signal along 
with their regular programme signals.
By receiving the RDS data, this receiver can 
do the following:
• Programme Type (PTY) Search (see page 10)
• Standby Reception of Traffic 

Announcement —TA (see the following) or 
your favorite programme (PTY) (see pages 
12 and 18)

• Tracing the same programme automatically 

—Network-Tracking Reception (see page 12)

• Programme Search (see page 18)

Storing your favorite programmes

You can store six favorite programme types.

Preset programme types in the number buttons 
(1 – 6):

1

  Perform steps 

~

 and 

Ÿ

 on page 10 to 

select a PTY code.

2

  Select the preset number (1 – 6) you 

want to store into.

Ex.:  When “ROCK M” is selected

3

  Repeat steps 

1

 and 

2

 to store 

other PTY codes into other preset 
numbers.

4

  Finish the procedure.

Using the standby receptions

  TA Standby Reception

TA Standby Reception allows the receiver to 
switch temporarily to Traffic Announcement 
(TA) from any source other than AM.
The volume changes to the preset TA volume 
level (see page 18).

To activate TA Standby Reception

The TP indicator either 
lights up or flashes.

•  If the TP indicator lights up, TA Standby 

Reception is activated.

•  If the TP indicator flashes, TA Standby 

Reception is not yet activated. (This occurs 
when you are listening to an FM station 
without the RDS signals required for TA 
Standby Reception.)

  To activate TA Standby Reception, tune in to 

another station providing these signals. The 
TP indicator will stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.