JVC KD-G527 - Инструкция по эксплуатации - Страница 19

ENGLISH

19

Tuning in to a preset DAB service

1

2

  Select the preset DAB service 

(primary) number (1 – 6) you want.

If the selected primary service has some 
secondary services, pressing the same 
button again will tune in to the secondary 
services.

Tracing the same programme—

Alternative Frequency Reception

You can keep listening to the same programme 
by activating the Alternative Frequency 
Reception.
• 

While receiving a DAB service:

  When driving in an area where a service 

cannot be received, this unit automatically 
tunes in to another ensemble or FM RDS 
station, broadcasting the same programme.

• 

While receiving an FM RDS station:

  When driving in an area where a DAB service 

is broadcasting the same programme as the 
FM RDS station is broadcasting, this unit 
automatically tunes in to the DAB service.

When shipped from the factory, Alternative 
Frequency Reception is activated.

To deactivate the Alternative Frequency 
Reception,

 see page 15.

To change the display information while 
tuning to an ensemble

Service name

=

Ensemble name

=

Channel 

number

=

Frequency

=

Clock

=

 (back to the 

beginning)

More about this unit

Basic operations 

Turning on the power

•  By pressing SOURCE on the unit, you can 

also turn on the power. If the source is ready, 
playback also starts.

Turning off the power

•  If you turn off the power while listening to a 

disc, disc play will start from where playback 
has been stopped previously, next time you 
turn on the power.

Selecting the sources

•  When no disc is loaded in the unit, “CD” 

cannot be selected.

•  “CD-CH” or “DAB” cannot be selected when 

the target component is not connected.

Tuner operations 

Storing stations in memory

•  During SSM search...
  – All previously stored stations are erased and 

stations are stored newly.

  – Received stations are preset in No. 1 (lowest 

frequency) to No. 6 (highest frequency).

  – When SSM is over, the station stored in 

No. 1 will be automatically tuned in.

•  When storing a station manually, a previously 

preset station is erased when a new station is 
stored in the same preset number.

FM RDS operations

•  Network-Tracking Reception requires 

two types of RDS signals—PI (Programme 
Identification) and AF (Alternative 
Frequency) to work correctly. Without 
receiving these data correctly, Network-
Tracking Reception will not operate correctly.

•  If a Traffic Announcement is received by TA 

Standby Reception, the volume level (TA VOL) 
automatically changes to the preset level.

To be continued...