JVC KD-G417 - Инструкция по эксплуатации - Страница 25

25

ENGLISH

More about this receiver

Basic operations 

Turning on the power

•  By pressing CD or FM/AM on the receiver, 

you can also turn on the power.

Turning off the power

•  If you turn off the power while listening to a 

disc, disc play will start from where playback 
has been stopped previously, next time you 
turn on the power.

Tuner operations 

Storing stations in memory

• During SSM search...
  – All previously stored stations are erased and  

stations are stored newly.

   – Received stations are preset in No. 1 (lowest 

frequency) to No. 6 (highest frequency). 

   – When SSM is over, the station stored in 

No. 1 will be automatically tuned in.

•  When storing a station manually, a previously 

preset station is erased when a new station is 
stored in the same preset number.

FM RDS operations

•  Network-Tracking Reception requires two 

types of RDS signals—PI (Programme 
Identification) and AF (Alternative 
Frequency) to work correctly. Without 
receiving these data correctly, Network-
Tracking Reception will not operate.

•  If a Traffic Announcement is received, the 

volume level (TA Volume) automatically 
changes to the preset level.

Disc operations 

Caution for DualDisc playback

•  The Non-DVD side of a “DualDisc” does 

not comply with the “Compact Disc Digital 
Audio” standard. Therefore, the use of Non-
DVD side of a DualDisc on this product may 
not be recommended.

General

•  This receiver has been designed to reproduce 

CDs/CD Texts, and CD-Rs (Recordable)/ 
CD-RWs (Rewritable) in audio CD (CD-DA), 
MP3 and WMA format.

•  When a disc has been loaded, selecting “CD” 

for the playback source starts disc play.

Inserting a disc

•  When a disc is inserted upside down, the disc 

automatically ejects.

•  Do not insert 8 cm discs (single CD) and 

unusual shape discs (heart, flower, etc.) into 
the loading slot.

Playing a disc

•  While fast-forwarding or reversing on an MP3 

or WMA disc, you can only hear intermittent 
sounds.

Playing a CD-R or CD-RW

•  Use only “finalized” CD-Rs or CD-RWs.
•  This receiver can play back only the files of 

the same type which is first detected if a disc 
includes both audio CD (CD-DA) files and 
MP3/WMA files.

•  This receiver can play back multi-session 

discs; however, unclosed sessions will be 
skipped while playing.

•  Some CD-Rs or CD-RWs may not play 

back on this receiver because of their disc 
characteristics, and for the following causes:

  – Discs are dirty or scratched.
  – Moisture condensation occurs on the lens 

inside the receiver.

  – The pickup lens inside the receiver is dirty.
  – CD-R/CD-RW on which the files are 

written with “Packet Write” method.

  – There are improper recording conditions 

(missing data, etc.) or media conditions 
(stain, scratch, warp, etc.).

•  CD-RWs may require a longer readout time 

since the reflectance of CD-RWs is lower 
than that of regular CDs.

•  Do not use the following CD-Rs or CD-RWs:
  – Discs with stickers, labels, or protective seal 

stuck to the surface.

  – Discs on which labels can be directly 

printed by an ink jet printer.

  Using these discs under high temperatures or 

high humidities may cause malfunctions or 
damages to discs.