JVC KD-G387 - Инструкция по эксплуатации - Страница 9

9

ENGLISH

To activate and select your favorite PTY code for 
PTY Standby Reception,

 see page 15.

The PTY indicator either lights up or flashes.
•  If the PTY indicator lights up, PTY Standby Reception 

is activated.

•  If the PTY indicator flashes, PTY Standby Reception is 

not yet activated.

  To activate PTY Standby Reception, tune in to another 

station providing these signals. The PTY indicator will 
stop flashing and remain lit.

To deactivate the PTY Standby Reception,

 select 

“OFF” for the PTY code (see page 15). The PTY indicator 
goes off.

Tracing the same programme—

Network-Tracking Reception

When driving in an area where FM reception is not 
sufficient enough, this unit automatically tunes in to 
another FM RDS station of the same network, possibly 
broadcasting the same programme with stronger 
signals (see the illustration below).

When shipped from the factory, Network-Tracking 
Reception is activated.

To change the Network-Tracking Reception 
setting,

 see “AF-REG” on page 14.

Programme A broadcasting on different frequency areas 
(01 – 05)

3

  Repeat steps 

1

 and 

2

 to store other PTY 

codes into other preset numbers.

4

  Finish the procedure.

Using the standby receptions

  TA Standby Reception

TA Standby Reception allows the unit to switch 
temporarily to Traffic Announcement (TA) from any 
source other than AM.
The volume changes to the preset TA volume level if the 
current level is lower than the preset level (see page 15).

To activate TA Standby Reception

The TP (Traffic Programme) indicator 
either lights up or flashes.

•  If the TP indicator lights up, TA Standby Reception is 

activated.

•  If the TP indicator flashes, TA Standby Reception is 

not yet activated. (This occurs when you are listening 
to an FM station without the RDS signals required for 
TA Standby Reception.)

  To activate TA Standby Reception, tune in to another 

station providing these signals. The TP indicator will 
stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

  PTY Standby Reception

PTY Standby Reception allows the unit to switch 
temporarily to your favorite PTY programme from any 
source other than AM.