JVC KD-DV6207 - Инструкция по эксплуатации - Страница 42

ENGLISH

42

Symptom

Remedy/Cause

USB memory playback

•  Noise is generated.

The track played back is not an MP3/WMA track. Skip to 
another file. (Do not add the extension code <.mp3> or 
<.wma> to non-MP3 or WMA tracks.)

•  “CHECK” keeps flashing on the display.

•  Readout time varies depending on the USB memory.
•  Do not use too many hierarchies and folders.
•  Turn off the power then on again.

•  “NO FILE” flashes on the display.

Attach a USB memory that contains tracks encoded in an 
appropriate format.

•  “NOT SUPP” appears on the display and track 

skips.

The track is unplayable.

•  “READ” and “FAILED” appear alternately 

on the display, then returns to the previous 
source.

•  The attached USB memory may be malfunctioning, or 

may not have been formatted correctly. The files included 
in the USB memory are corrupted.

•  Do not pull out or attach the USB memory while “CHECK” 

is shown.

•  Correct characters are not displayed (e.g. 

album name).

This unit can only display letters (upper case), cyrillic 
alphabets, numbers, and a limited number of symbols (see 
page 33).

•  While playing a track, sound is sometimes 

interrupted.

MP3/WMA tracks have not been properly copied into the 
USB memory. Copy MP3/WMA tracks again into the USB 
memory, and try again.

CD changer

•  “NO DISC” appears on the display.

Insert a disc into the magazine.

•  “NO MAG” appears on the display.

Insert the magazine.

•  “RESET 8” appears on the display.

Connect this unit and the CD changer correctly and press 
the reset button of the CD changer.

•  “RESET 1” – “RESET 7” appears on the display. Press the reset button of the CD changer.

•  The CD changer does not work at all.

Reset the unit (see page 2).

DAB

•  “NO DAB” appears on the display.

Move to an area with stronger signals.

•  “RESET 08” appears on the display.

Connect this unit and the DAB tuner correctly and reset the 
unit (see page 2).

•  The DAB tuner does not work at all.

Reconnect this unit and the DAB tuner correctly. Then, reset 
the unit (see page 2).

•  “ANT NG” appears on the display.

Check the cords and connections.