JVC KD-DV4407 - Инструкция по эксплуатации - Страница 29

ENGLISH

29

REFERENCES

•  This unit can show the names of albums, artists 

(performer), and Tag (Version 1.0, 1.1, 2.2, 2.3, or 
2.4) for the MP3/WMA/WAV files.

•  This unit can display only one-byte characters. No 

other characters can be correctly displayed.

•  This unit can play back files recorded in VBR (variable 

bit rate).

  Files recorded in VBR have a discrepancy in elapsed 

time indication.

•  This unit cannot play back the following files:
  –  MP3 files encoded with MP3i and MP3 PRO format.
  –  MP3 files encoded with Layer 1/2.
  –  WMA files encoded with lossless, professional, and 

voice format.

  –  WMA files which are not based upon Windows 

Media® Audio.

  –  WMA files copy-protected with DRM.
  –  Files which have the data such as ATRAC3, etc.
  –  AAC files and OGG files.

Playing DivX files

•  This unit can play back DivX files with the extension 

code <.divx>, <.div>, <.avi> (regardless of the 
letter case—upper/lower).

•  This unit supports DivX Media Format files, <.divx> 

or <.avi>.

•  This unit can display a unique registration code—

DivX Video-on-Demand (VOD—a kind of Digital 
Rights Management). For activation and more 
details, visit <www.divx.com/vod>.

•  Audio stream should conform to MP3 or Dolby Digital.
•  This unit does not support GMC (Global Motion 

Compression).

•  The file encoded in the interlaced scanning mode 

may not be played back correctly.

•  This unit cannot play back the following files:
  –  Files encoded in Codec (Compressor-decompressor) 

other than DivX Codec.

•  If you want to know more about DivX, visit 

<http://www.divx.com>.

Continued on the next page

Playing MPEG Video files

•  This unit can play back MPEG Video files with the 

extension code <.mpg>, <.mpeg>, or <.mod>*.

* 

<.mod> is an extension code used for the MPEG-2 files 
recorded by JVC Everio camcorders.

•  Audio stream should conform to MPEG1 Audio 

Layer 2.

•  This unit cannot playback the following files:
  –  WMV (Windows Media Video) files
  –  RM (Real Media) format files

Changing the source

•  If you change the source, playback also stops 

(without ejecting the disc).

  Next time you select “DISC” for the playback source, 

disc play starts from where it has been stopped 
previously.

  General settings—PSM 

•  If you change the “AMP GAIN” setting from 

“HIGH POWER” to “LOW POWER” while the 
volume level is set higher than “VOLUME 30,” the 
unit automatically changes the volume level to 
“VOLUME 30.”

  Disc setup menu

•  When the language you have selected is not recorded 

on a disc, the original language is automatically used 
as the initial language. In addition, for some discs, 
the initial languages settings will not work as you set 
due to their internal disc programming.

•  When you select “16:9” for a picture whose aspect 

ratio is 4:3, the picture slightly changes due to the 
process for converting the picture width.

•  Even if “4:3 PAN SCAN” is selected, the screen size 

may become “4:3 LETTERBOX” for some discs.