JVC KD-DB711 - Инструкция по эксплуатации - Страница 30

30

ENGLISH

•  This receiver cannot play back the following 

files:

  –  MP3 files encoded with MP3i and MP3 

PRO format.

  –  MP3 files encoded in an unappropriated 

format.

  –  MP3 files encoded with Layer 1/2.
  –  WMA files encoded with lossless, 

professional, and voice format.

  –  WMA files which are not based upon 

Windows Media

®

 Audio.

  –  WMA files copy-protected with DRM.
  –  Files which have the data such as WAVE, 

ATRAC3, etc.

•  The search function works but search speed is 

not constant.

Changing the source

•  If you change the source, playback also stops 

(without ejecting the disc).

  Next time you select “CD” for the playback 

source, disc play starts from where it has been 
stopped previously.

Ejecting a disc

•  If the ejected disc is not removed within 

15 seconds, the disc is automatically inserted 
again into the loading slot to prevent it from 
dust. (Disc will not play this time.)

General settings—PSM 

•  If you change the “AMP GAIN” setting from 

“HIGH PWR” to “LOW PWR” while the 
volume level is set higher than “VOL 30,” the 
receiver automatically changes the volume 
level to “VOL 30.”

Playing an MP3/WMA disc

•  This receiver can play back MP3/WMA files 

with the extension code <.mp3> or <.wma> 
(regardless of the letter case—upper/lower).

•  This receiver can show the names of albums, 

artists (performer), and ID3 Tag (Version 1.0, 
1.1, 2.2, 2.3, or 2.4) for MP3 files and for 
WMA files.

•  This receiver can handle only one-byte 

characters. No other characters can be 
correctly displayed.

•  This receiver can play back MP3/WMA files 

meeting the conditions below:
–  Bit rate: 8 kbps — 320 kbps
– Sampling frequency:

48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
48 kHz, 44.1 kHz, 32 kHz (for WMA)

–  Disc format: ISO 9660 Level 1/ Level 2, 

Romeo, Joliet, Windows long file name

•  The maximum number of characters for file/

folder names vary among the disc format used 
(includes 4 extension characters—<.mp3> or 
<.wma>).

  –  ISO 9660 Level 1: up to 12 characters
  –  ISO 9660 Level 2: up to 31 characters
  –  Romeo*: up to 128 (72) characters
  –  Joliet*: up to 64 (36) characters
  –  Windows long file name*: up to 128 (72) 

characters

  * The parenthetic figure is the maximum 

number of characters for file/folder names 
in case the total number of files and folders 
is 313 or more.

•  This receiver can recognize the total of 512 

files, of 200 folders, and of 8 hierarchies.

•  This receiver can play back the files recorded 

in VBR (variable bit rate).

  The files recorded in VBR have a discrepancy 

in elapsed time display, and do not show 
the actual elapsed time. Especially, after 
performing the search function, this difference 
becomes noticeable.