Hyundai Electronics H-CMMD4046 - Инструкция по эксплуатации - Страница 33

33

Loading a disc 

1.  Turn the pwer on (STANDBY button). 
2.  Insert the disc with the printed side facing upward into the slot. The unit will switch to DVD mode 

automatically. 

3.  Press the EJECT button on the panel to eject the disc. 

Playing/ pausing 

To ensure good system performance, wait until the unit finishes reading the disc information before proceeding. 
After the disc is on playback will start automatically. 
Press the PLAY/ PAUSE button on the panel or on RC to start/ pause the playback. In pause mode press it again 
to resume the playback. 

Stop the playback 

1.  During playback press the STOP button on the panel or STOP / GOTO button on the RC. Playback will be 

stopped. If the PLAY / PAUSE button is pressed, playback will start from the position at which it was 
stopped. If the disc is removed, the resume function is cancelled. 

2.  Press the STOP button again to finally stop the playback. If the PLAY / PAUSE button is pressed, playback 

will start from the very beginning. 

Playing the previous/ next track 

1.  During playback press the 

;

 button on the RC or the          button on the panel to start playback of the 

current track from the beginning. Press again to start playback of the previous track. 

2. Press 

the 

<

 button on the RC or the          button on the panel to start playing of the next track. 

3.  Press the digital buttons (1-9, 0) to enter the desired track number. 

Direct entering the number 

To enter the 2- or 3-digit number of the track or chapter keep on pressing the desired buttons with digits on the 
RC. For example, to enter number 135 press 1 => 3 => 5.