Hyundai Electronics H-CMD7071 - Инструкция по эксплуатации - Страница 20

20

Loading/Eject a disc

Turn the power on.
Insert the disc with the printed side facing upward into the slot.
Press EJECT button on the panel to eject the disc.

Inserting the SD/MMC card/USB device

Insert the MMC/SD card or USB device into MMC/SD compartment or USB socket. Then the playing mode will be changed into
MMC/ SD or USB mode automatically. The first card/USB device track playback will start.

Note:

When MMC/SD card and USB device are both inserted into their compartment or socket, the playing mode will be changed

into the mode of the later one.

Playing/pausing

When the disc has been already loaded press PLAY/PAUSE button on the RC to start playback. To ensure good system performance,
wait until the unit finishes reading the disc information before proceeding. Press and hold for 2 seconds the SET/PAU button on the
panel or press shortly the PLAY/PAUSE on the RC to pause the playback. Press again to resume the playback.

Stop playback

During playback press STOP button on the panel or STOP/REVERSE button on the RC to stop playback. When a DVD disc is used,
press this button twice to a complete stop of playback; if the button is pressed once, the unit will memorize the stop point and further
the playback will start beginning from this point.

Playing the previous/next track

During playback press PREV button to play the previous track. Press NEXT button to play the next track.

Scanning forward and backward

Press  and  hold  PREV  or  NEXT  buttons  to  fast  the  playing  in  backward  or  forward  direction.  Release  the  button  when  the  desired
location is found.