Hyundai Electronics H-CMD4028 - Инструкция по эксплуатации - Страница 13

12

13

Operation

Operation

unit. This enables to adjust the volume and 
quality of the sounding. For example, you can 
connect an MP3-player to listen to tracks using 
the car acoustic system.

Radio operations

Touch screen

In Radio mode touchable interface is 

available enabling you to perform various 
operations. The touch menu consists of two 
pages. Touch   icon in the right bottom part 
of the screen to switch between two pages.

Band select

Press repeatedly BND/NP button on the panel 

or BAND button on the RC or touch repeatedly 
BND icon on the screen to select your desired 
radio band in Radio mode: FM1, FM2, FM3, 
AM1 (MW1), AM2 (MW2). In each set of the 
bands you can store up to 6 preset stations, 
making total 30 preset memory stations.

Auto/Manual tuning

•  Manual tuning: Press PREVIOUS/NEXT 

buttons on the panel or on the RC or touch 
repeatedly   and   icons on the screen to 
manually adjust the radio frequency.

•  Auto tuning: Press and hold PREVIOUS/

NEXT buttons on the panel or on the RC or 
touch   and   icon on the screen, the radio 
will seek to the next up or down strong and 
clear frequency station automatically. Repeat 
this action to seek for other desired stations. 
To stop automatic search, press NEXT or 
PREVIOUS button on the panel or on the RC 
or touch   and   icon on the screen.

Programming tuner stations

There are six numbered preset buttons on 

the RC (1~6) and six number icons (P1~P6) in 
the bottom of the screen, under which you can 
store and recall stations for each band. Select 
the needed frequency, then press and hold a 
preset button. The station will be saved in the 

memory under the corresponding number. To 
recall a stored station, press the corresponding 
preset button.

Automatic store/preset scan

•  Automatic store: Press and hold AUDIO/

TYPE/APS button on the panel or AMS button 
on the RC, or touch and hold AMS icon on the 
screen. SCAN will be displayed. The radio will 
automatically store the 6 strongest available 
stations to the 6 preset memories of the current 
band. To stop auto store, press this button again.

•  Preset scan: Press AUDIO/TYPE/APS 

button on the panel or AMS button on the RC, 
or touch AMS icon on the screen. INTRO will 
be flashing. The receiver will scan the saved 
stations in all bands for 5 seconds.

Mono/Stereo control 

(in FM radio mode)

Press repeatedly SELECT button on the 

panel or SEL button on the RC until the display 
shows ST ON (ST OFF). Press VOL+/VOL- 
buttons on the RC or rotate VOLUME regulator 
on the panel to select between ST ON/OFF. ST 
ON means stereo reception of the signal; ST 
OFF means mono reception mode. Or press 
STEREO button on the RC or touch MO/ST 
icon on the screen to switch stereo reception 
on/off. Improvement of reception of distant 
stations can be done by selecting mono mode, 
which may cut down some reception noise.

Local radio station search

Press repeatedly SELECT button on the 

panel or SEL button on the RC until the display 
shows LOC ON (LOC OFF). Press VOL+/VOL- 
buttons on the RC or rotate VOLUME regulator 
on the panel to select between LOC ON/OFF. 
LOC ON means that only local stations are 
received; LOC OFF means that both local and 
distant stations with weak and strong signal are 
received. Or press LOCAL button on the RC 
or touch LOC/DX icon on the screen to switch 
between local and distant station reception.

RDS function

RDS (Radio Data System) service availability