Магнитолы Hyundai Electronics H-CDM8065 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
11
Setting other characteristics
Press and hold for 2 seconds the SEL button to enter the setting mode.
Press the SEL button or
button to select the setting: EQ => CLK 12H/24H => CT => STEREO => LO/DX =>
AREA => VOL PGM => BEEP => CLK ON => SEEK RDS => TA SEEK => TA VOL => MASK => REG.
Rotate the VOL knob to set the setting. Press SEL to confirm the setting.
-
EQ mode: rotate the VOL knob to choose the equalizer mode: OFF, FLAT, CLAS, ROCK, POP.
-
CLK 12H/24H: rotate the VOL knob to choose the time mode: 12H or 24H.
-
CT mode: rotate the VOL knob clockwise to set minutes, anticlockwise to set hour.
-
STEREO mode: rotate the VOL knob to choose the mode: Stereo or Mono.
-
LO/DX mode: rotate the VOL knob to choose tuner sensitivity local or distant.
-
AREA mode: rotate the VOL knob to choose the area: Europe, Latin, OIRT (option), Austria, Asia, USA.
-
VOL PGM mode: rotate the VOL knob to adjust volume program value. When turning on the unit, if this value
is Less than current volume value, change the current volume value equal to VOL PGM value; otherwise, the
current volume value will be remained.
-
BEEP mode: rotate the VOL knob to choose BEEP ON or OFF mode.
-
CLK ON mode: rotate the VOL knob to choose CLK ON or OFF mode. When CLK is ON, when the power is
off the time will be on display.
-
SEEK RDS mode: rotate the VOL knob to choose RDS or ALL. If ALL is selected during the Seek RDS tuning
mode or AF Search mode, the unit will stop at all radio station including Non RDS station regardless AF and TA
is switches on. If RDS is selected and the AF is on during the Seek RDS tuning mode or AF Search mode, the
unit will stop at only RDS station.
-
TA SEEK mode: rotate the VOL knob to choose TA SEEK or TA ALARM.
TA seek:
when newly tuned station does not receive TP information for 60 seconds, the radio retunes to next
station which has not the same station (PI) as the last station, but has the TP information.
