Hyundai Electronics H-CDM8016 - Инструкция по эксплуатации - Страница 16

 16

Volume control/select

Rotating VOL knob, you can adjust VOL/BASS/TRE/BAL/FAD. To select the functions, press SEL button shortly until the
desired functions are shown on the display. Increase or decrease the volume by turn VOL knob right or left. These buttons can be
used to adjust the BASS, TREBLE, BALANCE and FADER.

Note:

 Bass and treble adjustment is not available when DSP (equalizer) is on.

Other functions

To choose the corresponding mode, press and hold SEL knob for 2 seconds, and then press it repeatedly until the display shows
the mode. Rotate VOL knob to choose the needed value. After choosing, please leave the unit idle to activate.
TA SEEK/TA ALARM
In TA SEEK mode, the unit will seek for traffic announcement program when TA is pressed; in TA ALARM mode the alarm is
set off.
MASK DPI/MASK ALL
During  MASK  DPI  mode,  the  unit  will  mask  only  the  AF  which  has  different  PI,  this  is  the  default  mode;  during  MASK  ALL
mode, the unit will mask the AF which has different PI and no RDS signal with high field strength.
RETUNE S/L - SHORT/LONG
“RETUNE” refers to the time period the unit allows for radio scan when reception is interrupted. “S” represents a time period of
30 seconds and “L” represents a time period of 90 seconds.
AUDIO DSP CONTROLS
Choose equalizer mode: POP M => ROCK M => CLASS M=> FLAT M =>DSP OFF.
LOUDNESS CONTROLS
Select LOUD ON or OFF. In ON mode the bass and treble response will be boosted. Recommended to activate when listening at
a low volume level.
ESP (Electronic Shock Protection) MODE
Choose the value for CD disc (45 sec. for Audio-CD, 120 sec for MP3, 300 sec for WMA).
BEEP MODE