Hyundai Electronics H-CCR8190M - Инструкция по эксплуатации - Страница 11

Operation

11

current band for several seconds.

Programming tuner stations

•  Press LIST button on the panel 

once to show the preset list; rotate 
VOLUME knob on the panel to select 
a preset station and press SELECT 
button to confirm selection. After 
choosing a preset station, you can 
adjust the frequency as described 
above in “Auto/Manual tuning” and 
save it by pressing and holding 
SELECT button on the panel. Or, you 
can select a station in the list after 
adjustment and save it by pressing 
and holding SELECT button; the 
previous station will be substituted by 
the new one.

•  To store a station, select the 

desired band and station. Press and 
hold the desired number button for 
more than 2 seconds. When stored, 
the preset number will appear on 
the display. The station can be 
recalled anytime by pressing the 
corresponding number button.

•  To call a saved station, press 

corresponding number button. To 
save the current frequency in a 
memory position, press and hold a 
number button corresponding to the 
needed memory position.

Mono/Stereo control (in FM 

radio mode)

Press LIST button twice to show 

the function list; rotate VOLUME knob 
to select ST option. Press SELECT 
button, then rotate VOLUME knob 
to select ST ON or ST OFF. ST ON 
means stereo reception of the signal; 
ST OFF means mono reception mode. 
Improvement of reception of distant 

stations can be done by selecting 
mono mode, which may cut down 
some reception noise.

Local radio station search

Press LIST button twice to show 

the function list; rotate VOLUME knob 
to select LOC option. Press SELECT 
button, then rotate VOLUME knob to 
select LOC ON or LOC OFF. LOC 
ON means that only local stations are 
received; LOC OFF means that both 
local and distant stations with weak 
and strong signal are received.