Hyundai Electronics H-CCR8103F - Инструкция по эксплуатации - Страница 10

Operation

10

Audio parameter setting

Press EQ or SELECT button 

repeatedly to select a parameter: 
BAS (bass) => TRE (treble) => BAL 
(balance) => FAD (fader) => LOUD 
ON/OFF => EQ (equalizer) => ST/
MONO (stereo or mono). Rotate 
VOLUME knob to adjust each mode:

•  Bass/Treble: from -7 to 7;
•  Balance: L07 (left) to R07 (right);
•  Fader: from R07 (rear) to F07 

(front).

•  Loudness: see “Loudness” 

paragraph above.

•  EQ: select ROCK/POP/CLASS/

JAZZ equalizer mode.

  When equalizer is in any mode 

except OFF, bass and treble are not 
adjustable.

Preset equalizer modes

IN USB/SD playback mode press 

SELECT button repeatedly until 
ROCK/POP/CLASS or JAZZ equalizer 
mode is displayed. Rotate VOLUME 
regulator to select equalizer mode.

Clock

Press and hold BND/CLK button 

to display the time on the screen. 
Then press and hold this button 
again; the hour indication will blink. 
Rotate VOLUME regulator to adjust 
hours; press BND/CLK button to go 
to minutes; rotate VOLUME regulator 
to adjust minutes. To confirm the 
adjustment, press BND/CLK button or 
leave the unit idle for several seconds.

AUX input

AUX-in jack is intended for 

connecting an external audio 
equipment to amplify the sound. If 

connection is made correctly, the 
audio signal from the external source 
will be translated through the acoustics 
of the head unit. This enables to 
adjust the volume and quality of the 
sounding. For example, you can 
connect an MP3-player to listen to 
tracks using the car acoustic system.

Radio operations

Band select

In Radio mode press BND/CLK 

button to select a radio band: F1 
(FM1), F2 (FM2), F3 (FM3). 6 stations 
can be saved in each band.

Manual/automatical tuning

•  Press 

/

 buttons 

repeatedly to adjust the needed 
frequency manually.

•  Press and hold 

 or 

button. The radio will seek to the next 
down or up strong and clear frequency 
station.

Storing and recalling stations

•  Press and hold APS button for 

more than 2 seconds to automatically 
find and store 6 strongest stations in 
the current band.

•  After 6 strongest stations are 

saved, press APS button; scanning of 
all stored stations will begin.

•  Press buttons 1-6 to select saved 

channels. If you want to save a new 
station in a preset position, select 
corresponding station number with 
1-6 buttons. Then tune to the needed 
frequency as described in “Manual/
automatical tuning“ above and press