Hyundai Electronics H-CCR8098 - Инструкция по эксплуатации - Страница 12

Operation

12

Manual/automatical tuning

•  Press and hold 

/

 buttons 

to display MANUAL. Now you can 
press these buttons repeatedly to 
adjust the needed frequency manually.

•  To adjust the needed frequency 

automatically, press 

/

 buttons. 

The radio will seek to the next down or 
up strong and clear frequency station. 
Repeat this action to seek for other 
desired stations.

Storing and recalling stations

To store a station
To store a station, select the desired 

band and station. Press and hold the 
desired number button for more than 
2 seconds. When stored, the preset 
number will appear on the display. 
The station can be recalled anytime 
by pressing the corresponding number 
button.

Store stations automatically
•  Press and hold F/PS button on 

the panel or APS button on the RC for 
more than 2 seconds to automatically 
find and store 6 strongest stations in 
the current band.

•  After the 6 strongest stations are 

saved, press F/PS button on the panel 
or APS button on the RC; scanning of 
all stored station will begin.

Mono/Stereo control 

(in FM 

radio mode)

Press SELECT button on the panel 

or SEL button on the RC repeatedly 
until the display shows STEREO 
(MONO). Turn VOLUME knob or 
press VOL+/VOL- buttons on the RC 
to switch between stereo reception 
or mono reception. Improvement of 
reception of distant stations can be 

done by selecting mono mode, which 
may cut down some reception noise.

RDS function

RDS (Radio Data System) service 

availability varies with areas. Please 
understand if RDS service is not 
available in you area, the following 
service is not available, either.

AF (Alternative Frequencies) 

function

Press and hold SEL button to turn 

the AF function on or off.

When the radio signal strength is 

poor, enabling the AF function will 
allow the unit to automatically search 
another station with the same PI 
(Program Identification) as the current 
station but with a stronger signal, 
so that you do not have to retune 
the stations when driving between 
different transmitter coverage areas. 
When AF symbol is on, it means 
RDS information is received; when 
AF symbol is flashing, it means RDS 
information is not yet received.

PS (Program Service name): the 

name of station will be display instead 
of frequency.

If RDS service is not available 

in your area, turn off the AF mode. 
Default setting is ON.

TA (Traffic Alarm) function

Press and hold MOD/TA button to 

turn TA function on or off.

In TA mode traffic program will 

be automatically searched, until the 
program is received. When traffic 
announcement is received the unit will 
temporarily switch to the tuner mode