Hyundai Electronics H-CCR8086 - Инструкция по эксплуатации - Страница 11

11

Operation

4

Jazz, Country

Weather, 
Finance, Children

5

Nation, Oldies

Social, Religion, 
Phone IN

6

Folk

Travel, Leisure, 
Document

When PTY is selected, the radio starts to 

search corresponding PTY information, and 
stops if the corresponding PTY information 
is detected. If no buttons are pressed within 
several seconds, previously selected PTY is 
searched. During 1 loop, if desired PTY is not 
found, the unit will return to previous mode. 
Press PTY/CLK button to switch the PTY 
function off.

Other parameter setting

To choose the corresponding option, press 

and hold SELECT button for 2 seconds, then 
press it repeatedly until the display shows the 
needed option. Turn VOLUME knob to choose 
the needed value. After choosing, leave the 
unit idle to activate.

TA SEEK/TA ALARM
In TA SEEK mode, the unit will seek for 

traffic announcement program when TA button 
is pressed; in TA ALARM the unit does not 
retune to TA information.

PI SOUND/PI MUTE
PI sound refers to the reception noise 

when the AF function tries to scan alternative 
frequency.

MASK DPI/MASK ALL
During MASK DPI mode, the unit will mask 

only the AF which has different PI, this is the 
default mode; during MASK ALL mode, the unit 
will mask the AF which has different PI and no 
RDS signal with high field strength.

RETUNE S/L - SHORT/LONG
“RETUNE” refers to the time period the 

unit allows for radio scan when reception is 
interrupted. “S” represents a long time period, 
and “L” represents a short time period.

USB/SD/MMC operations

Connecting a USB-device/Memory 

card

Insert a USB device into the USB port of 

this unit. Or detach the front panel and insert 
an SD/MMC memory card until a click into the 
memory card slot. To remove the card, press it 
until a click, then pull to remove.

  USB/SD/MMC supported capacity: up 

to 16 Gb.

For correct and satisfactory operation, 

licensed SD/MMC memory cards of famous 
brands should be used with this unit. Avoid 
using memory cards of unknown brands. Some 
models of USB devices cannot be supported 
by this unit due to incompatibility.

Playback

When a USB or a memory card is first 

connected, playback will begin automatically.

Depending on the number of files and folders, 

the device may take several seconds to begin 
playback. If no MP3/WMA files are detected, 
“USB” or “SD” will be displayed.

Track select

•  Press 

 button to skip to the beginning 

of the next track. Press 

 button to skips to 

the previous track.

•  Press F/PS button; track number will blink 

on the display. Rotate VOLUME knob to select 
the track number. Press SELECT button to 
confirm your selection.

Folder select

Press 5/ - button to select the previous 

folder. Press 6/ + button to select the next 
folder.

Fast forward/rewind

Press and hold 

 or 

 button to rewind 

or fast forward the current track.

Pause

Press 1/

 button to temporarily stop file