Магнитолы Hyundai Electronics H-2204 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
Playback
·
You can choose either tape
or tape
for playback.
·
Set Function switch to TAPE position.
·
Put in your cassette tape.
·
Press PLAY button to activate playback.
·
Adjust volume regulator to the appropriate level as desired.
·
Press STOP/EJECT button when finished.
Continuous playback (only running from
to
)
·
Set Function switch to TAPE position.
·
Put in your cassette tapes.
·
Press PLAY button of the desk
.
·
Press PAUSE button and PLAY button of the deck
.
·
Adjust volume regulator to the appropriate level as desired.
·
When tape
reaches its end and store, tape
starts playing back automatically stop.
AUTO STOP
·
At the end of the tape during the playback and record operations, the forward and rewind operations the auto stop system will function and
disengage the mechanism.
Recording (deck
only)
Recording from tape A to tape B
·
Insert a pre-recorded cassette with full reel on the right into desk
.
·
Insert a blank cassette tape with full reel on the right into desk
.
·
Set Function switch to TAPE position.
·
Press PAUSE button and RECORD button of the tape
. To start recording press PLAY button of the tape
and press RAUSE button of the
tape
. Then both tapes start dubbing synchronously.
·
Adjust VOLUME regulator for monitoring purpose.
·
To stop dubbing, press both STOP/EJECT button.
Recording with built-in microphone
·
Insert a blank cassette tape into the desk
.
·
Set Function switch to TAPE position.
·
Press RECORD button.
·
Speak in a normal voice at a distance of approximately 30 cm from the built-in microphone.
