Магнитолы Hyundai Electronics H-2203 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
FUNCTION
FUNCTION SW ITCH
·
Position to RADIO for:
-Radio reception
-Cassette recording from the radio
·
Position to TAPE for:
-Cassette playback
-Recording from built-in Condenser Microphone
SOUND ADJUSTMENT
VOLUME
The level of sound reproduced by the loudspeaker or Stereo Headphones is adjusted by the VOLUME control.
NOTE:
During recording, adjusting the VOLUME control only affects the monitor sound and not the content of recording.
RADIO OPERATION
OPERATION
·
Set Function switch to RADIO position thus the Power LED indicator should light up.
·
Select your desired broadcasting band with Band switch.
·
Rotate the Tuning control regulator to receive the desired broadcast.
·
Adjust the level and quality of sound with Volume control switch.
·
To turn off the radio, set the Function switch to TAPE position.
ANTENNA
·
For FM reception, adjust the telescopic antenna appropriately to obtain the best reception on the band selected.
·
The AM signals are picked up through the built-in ferrite antenna. The set should be placed to a position for the best reception.
FM AND FM STEREO RECEPTION
·
Set Band switch FM position, programmer is received in mono mode.
NOTE:
In particular when stereo signal is weak and much noise are received, it is preferable to receive the programmer in mono.
·
Set FM MODE switch to FM STEREO position, programmer is received in stereo mode, thus FM STEREO LED should light up.
