Магнитолы Hyundai Electronics H-1414 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3
Important safeguards
·
ATTENTION:
The owner s manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual.
·
DANGEROUS VOLTAGE:
Uninsulated dangerous voltage that may be of sufficient magnitude to constitute a risk of electrical shock to persons is
present within this product enclosure.
·
CAUTION
: To reduce the risk of electric shock, do not remove cover (or back). Prefer servicing to qualified service personnel.
Power supply
Battery operation
·
Open the battery compartment cover.
·
Insert 6 batteries (R-14 or UM-2 or C). Please observe correct battery polarities or the set will not work.
·
Close the battery compartment cover.
AC operation
·
Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
·
Plug the corresponding end of cord into the AC socket on the rear of the set.
·
Insert the plug into power supply.
CAUTION:
·
When the set is only used with AC or is not used for 2 weeks or more, please remove the batteries, to avoid damage to the set from leakage of batteries.
·
Always switch off the unit when not in use.
·
Always unplug the appliance from power supply, when no use long time.
Stereo headphone connecting
·
For private listening, insert 3.5 mm headphone into the stereo headphone jack.
·
Adjust volume control to the appropriate level as desired.
·
When the stereo headphone jack is plugged, speaker will disconnect automatically.
Radio operation
·
Set FUNCTION switch to RADIO position.
·
Select your desired broadcasting band with BAND switch.
·
Rotate the TUNING control regulator to receive the desired broadcast.
·
Adjust the level and quality of sound with VOLUME control regulator.
·
To turn off the radio, set the FUNCTION switch to OFF position.
