Магнитолы Hyundai Electronics H-1409 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
·
Press the PLAY/PAUSE button to pause at any track when playing, track number on the LCD display flashed.
·
To stop the CD, press the STOP button. This will reset the CD player to the first track.
Skip and search mode
·
Press the NEXT button once to skip to the next track. Keep pressing to search for a particular at high speed forward. Release the button to resume normal
play.
·
Press the BACK button once to skip back to previous track. Keep pressing to search for a particular point at high speed backward. Release the button
resume normal play.
Repeat mode
·
Press the REPEAT button once for single track repeat playing.
·
Press twice for all track repeat playing.
·
To cancel repeat play, press REPEAT button.
Program mode
·
Up to 20 tracks can be programmed for disc play in any order or the same track can be repeated up to 20 times. Before use, be sure to press the STOP
button.
·
Press the PROG button, the track number will flash on the display.
·
Select a desired track by using the BACK AND NEXT buttons.
·
Press the PROG button to confirm.
·
Repeat steps described above to enter additional memories into the program if necessary.
·
After a maximum of 20 songs (or less) have been selected as described above, press the PROG button.
·
The display will now show the exact song sequence in memory by displaying all the song numbers rapidly.
·
Also, the program led-light will remain "on" to indicate that you have saved a program-memory (sequence).
·
When all the desired tracks have been programmed, press PLAY button to play the disc in the order you have programmed.
·
To stop the CD, press the STOP button.
NOTE:
The program memory will be cleared when you press STOP button twice or turn off the CD or power supply.
·
To remove the CD from the unit open the CD door.
·
To turn off the CD player set FUNCTION switch to TAPE position.
MP3 operation
·
Set FUNCTION switch to CD (MP3) position.
·
Open the CD door. Put a MP3 disk into the CD compartment and close the CD door.
·
The disk will spin and perform a full check of the disc to count the total number of songs. Then playback of the first song (track) will begin and the
display will indicate the current track no: (001).
·
At any time during playback, press and release BACK AND NEXT buttons to skip backwards or forwards by one track.
·
MP3 discs often have folder (sub-directories) which contain groups of songs.
