Магнитолы Hyundai Electronics H-1405 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
Radio operation
·
Set FUNCTION switch to RADIO position.
·
Select your desired broadcasting band by pressing the PLAY/PAUSE/BAND (AM/FM) button.
·
Press NEXT/TUNE UP or BACK/TUNE DOWN buttons and then release the buttons when the fast scanning starts. The frequency will continue to
change and will automatically stop when a broadcast station is received.
·
To receive a weak broadcast signal press the NEXT/TUNE UP or BACK/TUNE DOWN button by one press at a time and adjust the frequency you wish
to receive.
·
Adjust the level and quality of sound with VOLUME control regulator.
·
To turn off the radio, set the FUNCTION switch to TAPE position.
Radio station memory
·
12 broadcast stations 6 AM & 6 FM can be stored to the preset Memory locations.
·
During tuner (radio) mode find a desired station.
·
Press "
MEM.UP/SKIP +10/FOLDER
" button to activate memory setting mode (the "mem" symbol will flash repeatedly in the display).
·
Press
NEXT/TUNE UP
button or
BACK/TUNE DOWN
button to choose the desired memory location (small number displayed on right side of screen).
·
Press "
MEM.UP/SKIP +10/FOLDER
" button again, then the desired stations will be stored in the selected memory locations.
·
Repeat above steps for storing various stations to other memory locations.
Listening to radio stations from memory
·
Set FUNCTION switch to RADIO position.
·
Select your desired broadcasting band by pressing the PLAY/PAUSE/BAND (AM/FM) button.
·
Press the REPEAT/PROG/MEMORY button.
·
Press
NEXT/TUNE UP
button or
BACK/TUNE DOWN
button to choose the desired memory location (small number displayed on right side of screen).
Antenna
·
For FM reception, adjust the telescopic antenna appropriately to obtain the best reception on the band selected.
·
The AM signal is picked up through the built-in ferrite antenna. The set should be placed to a position for the best reception.
Cassette recorder operation
Cassette playback
·
Slide the FUNCTION switch to TAPE position.
·
Press the STOP/EJECT button to open the cassette compartment.
·
Insert a cassette and push the cassette door to close the cassette compartment.
·
Press the PLAY button to start the playing.
·
Press the PAUSE button to pause the playing.
