Магнитолы Hyundai Electronics H-1005 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3
POWER SUPPLY
BATTERY OPERATION
·
Set the FUNCTION switch to the TAPE position.
·
Open the battery compartment cover.
·
Insert 4 UM1 batteries. Please observe correct battery polarities or the set will not work.
·
Close the battery compartment cover.
AC OPERATION
·
Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
·
Plug the corresponding end of cord into the AC socket on the rear of the set.
·
Insert the plug into power supply.
CAUTION:
·
W hen the set is only used with AC or is not used for 4 weeks or more, please remove the batteries, to avoid damage to the set from
leakage of batteries.
·
Always unplug the appliance from power supply, when no use long time.
·
This radio cannot be operated by batteries if the AC power cord is connected to the unit.
RADIO OPERATION
OPERATION
·
Set Function switch to RADIO position.
·
Select your desired broadcasting band with Band switch.
·
Rotate the Tuning control regulator to receive the desired broadcast.
·
Adjust the level and quality of sound with Volume control regulator.
·
To turn off the radio, set the Function switch to TAPE position.
ANTENNA
·
For FM reception, adjust the telescopic antenna appropriately to obtain the best reception on the band selected.
·
The AM signals are picked up through the built-in ferrite antenna. The set should be placed to a position for the best reception.
CAUTION:
·
Do not connect FM antenna to an external antenna.
