Makita 4351FCT - Инструкция по эксплуатации - Страница 5

5 

Uncertainty (K) : 3 dB(A) 

Wear ear protection 

ENG220-1 

Vibration 

The vibration total value (tri-axial vector sum) 
determined according to EN60745-2-11: 

Work mode : wood cutting 
Vibration emission (a

h,CW

) : 6.5 m/s

2 

Uncertainty (K) : 1.5 m/s

2 

ENG304-1 

Work mode : metal cutting 
Vibration emission (a

h,CM

) : 4.5 m/s

2 

Uncertainty (K) : 1.5 m/s

2 

ENG901-1 

• 

The declared vibration emission value has been 
measured in accordance with the standard test 
method and may be used for comparing one tool 
with another. 

• 

The declared vibration emission value may also be 
used in a preliminary assessment of exposure. 

WARNING: 

• 

The vibration emission during actual use of the 
power tool can differ from the declared emission 
value depending on the ways in which the tool is 
used. 

• 

Be sure to identify safety measures to protect the 
operator that are based on an estimation of 
exposure in the actual conditions of use (taking 
account of all parts of the operating cycle such as 
the times when the tool is switched off and when it 
is running idle in addition to the trigger time). 
 

ENH101-12 

EC Declaration of Conformity 

We Makita Corporation as the responsible 
manufacturer declare that the following Makita 
machine(s): 

Designation of Machine:   

Jig saw

Model No./ Type: 4351T, 4351CT, 4351FCT 
are of series production and 

Conforms to the following European Directives: 

98/37/EC until 28th December 2009 and then with 
2006/42/EC from 29th December 2009 

And are manufactured in accordance with the following 
standards or standardised documents: 

EN60745 

The technical documentation is kept by our authorised 
representative in Europe who is:   

Makita International Europe Ltd, 
Michigan, Drive, Tongwell, 
Milton Keynes, MK15 8JD, England 
 

30th January 2009

000230 

Tomoyasu Kato 

Director 

Makita Corporation 

3-11-8, Sumiyoshi-cho, 

Anjo, Aichi, JAPAN 

GEA010-1 

General Power Tool Safety 
Warnings 

WARNING Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury. 

Save all warnings and instructions for 
future reference. 

GEB016-2 

SPECIFIC SAFETY RULES 

DO NOT let comfort or familiarity with product 
(gained from repeated use) replace strict adherence 
to jig saw safety rules. If you use this tool unsafely 
or incorrectly, you can suffer serious personal 
injury. 

1. 

Hold power tool by insulated gripping 
surfaces, when performing an operation 
where the cutting accessory may contact 
hidden wiring or its own cord.

 Cutting 

accessory contacting a "live" wire may make 
exposed metal parts of the power tool "live" and 
could give the operator an electric shock. 

2. 

Use clamps or another practical way to secure 
and support the workpiece to a stable platform.

Holding the work by hand or against your body 
leaves it unstable and may lead to loss of control. 

3. 

Always use safety glasses or goggles. 
Ordinary eye or sun glasses are NOT safety 
glasses. 

4. 

Avoid cutting nails. Inspect workpiece for any 
nails and remove them before operation. 

5. 

Do not cut oversize workpiece. 

6. 

Check for the proper clearance beyond the 
workpiece before cutting so that the blade will 
not strike the floor, workbench, etc. 

7. 

Hold the tool firmly. 

8. 

Make sure the blade is not contacting the 
workpiece before the switch is turned on. 

9. 

Keep hands away from moving parts. 

10. 

Do not leave the tool running. Operate the tool 
only when hand-held. 

11. 

Always switch off and wait for the blade to 
come to a complete stop before removing the 
blade from the workpiece. 

12. 

Do not touch the blade or the workpiece 
immediately after operation; they may be 
extremely hot and could burn your skin. 

13. 

Do not operate the tool at no-load 
unnecessarily.