Лобзики Graphite 58G072 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
21
OPERATION AND MAINTENANCE
Unplug the power cord from mains socket before commencing any activities related to installation,
adjustment, repair or maintenance.
●
Cleaning the device after each use is recommended.
●
Do not use water or any other liquid for cleaning.
●
Clean the tool with a dry cloth or blow with compressed air at low pressure.
●
Do not use any cleaning agents or solvents, they may damage plastic parts.
●
Clean ventilation holes in the motor casing regularly to prevent device overheating.
●
Regular lubrication of guiding roller is recommended. A drop of oil applied in this spot will prolong
lifetime of the roller.
●
In case of power cord damage replace it with a cord with the same specification. Entrust the repair to
a qualified specialist or return the tool to a service point.
●
In case of excessive commutator sparking, have the technical condition of carbon brushes of the
motor checked by a qualified person.
●
Always store the tool in a dry place, beyond reach of children.
REPLACEMENT OF CARBON BRUSHES
Immediately replace worn out (shorter than 5 mm), burnt or cracked motor carbon brushes. Always
replace both carbon brushes at a time.
Entrust replacement of carbon brushes only to a qualified person. Only original parts should be
used.
All defects should be repaired by service workshop authorized by the manufacturer.
TECHNICAL PARAMETERS
RATED PARAMETERS
Jigsaw
Parameter
Value
Supply voltage
230 V AC
Power supply frequency
50 Hz
Rated power
800 W
Blade stroke cycles (without load)
500-3000 min
-1
Maximum thickness of cut ma-
terial
Wood
80 mm
Metal
10 mm
Blade stroke length
20 mm
Laser class
2
Laser power
< 1mW
Laser wavelength
λ = 650 nm
Protection class
II
Weight
2,45 kg
Year of production
2015
NOISE AND VIBRATION DATA
Information regarding noise and vibration
The following levels of emitted noise, such as emitted acoustic pressure Lp
A
and acoustic power level Lw
A
and measurement uncertainty K have been given in the instruction manual as defined in the EN 60745
standard.
The following vibration value (acceleration value) a
h
and measurement uncertainty K have been determi-
ned as defined in the EN 60745-2-11 standard.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
