Bosch GST 160 CE - Инструкция по эксплуатации - Страница 13

 English | 

13

Bosch Power Tools

1 609 92A 2BW | (25.1.16)

Maintenance and Cleaning



For safe and proper working, always keep the machine 
and the ventilation slots as well as the tool holder 
clean.

If the replacement of the supply cord is necessary, this has to 
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.

Clean the saw blade holder regularly. For this, remove the saw 
blade from the machine and lightly tap out the machine on a 
level surface.

Regularly spray penetrating oil onto the saw blade holder (see 
figure 16, page 194).

Check the guide roller  regularly. If worn, it must be replaced 
through an authorised Bosch after-sales service agent.

Lubricate the guide roller occasionally with a drop of oil (see 
figure 17, page 194).

After-sales Service and 
Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare 
parts. Exploded views and information on spare parts can al-
so be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions 
concerning our products and their accessories.

In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of 
the machine.

Mounting the metal overshoe

6

188

Mounting the splinter guard

7

189

Orbital Action Settings

8

189

Adjusting the stroke rate prese-
lection

9

190

Switching the Power Tool On/Off

10

190 – 191

Guide the power tool toward the 
workpiece only when switched on

11

191

Switching the worklight On/Off

12

192

Lubrication when cutting metal

13

192

Plunge Cutting

14

193

Selecting Accessories

–

195 – 197

Action

Figure

Please observe

Page

OBJ_BUCH-2000-004.book  Page 13  Monday, January 25, 2016  6:24 PM