GBC 5000 - Инструкция по эксплуатации - Страница 6

GB

6     

register this product online at www.accobrands.com

getting ready to laminate

Easy Set Up

1

   Remove the plastic exit tray from the box and place into the two holes on the back of the 

laminator and extend to use. Ensure that there is sufficient space behind the laminator for the 

item to be removed.

2

   Take the electrical plug and place in an appropriate power source, which is near the table you 

intend to use.

3

   The laminator will briefly flash the GBC logo on the control panel and will make an audible beep.

Interactive User Display

4

   To use the laminator gently tap the ‘power on’ button. A sequence of lights will cross the control 

panel.

NOTE:  Your new laminator may emit 

a slight odour during the initial 

operation. Its is normal and will 

diminish after a few hours of 

operation.

5

   If 75mic is not the pouch thickness you want to select, using the arrows scroll until the required 

pouch thickness setting is shown and press “Enter”.

Intelligent Pouch Select

6

   Using the ‘Auto’ setting allows the user to use any thickness of pouch and the laminator 

will automatically measure the thickness of the pouch and document and self set to the 

appropriate speed.

NOTE:  During warm up a circle will be 

formed on the control panel and a 

red indicator will flash in the centre 

of the circle until ready ( 

 ). 

When ready a series of three beeps 

are heard and the ( 

 ) will show 

on the display. The machine will not 

take any pouch during warm up.