Makita UH5261 - Инструкция по эксплуатации - Страница 6

Кусторезы Makita UH5261 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 48
Загружаем инструкцию
background image

12.  Before starting work check to make sure that the 

trimmer is in good and safe working order. Ensure 
guards are fitted properly. Check cable for 
damage before starting work and replace if 
necessary. The hedge trimmer must not be used 
unless fully assembled. 

13.  Keep cable away from the cutting area. Always 

work in such a way that the extension power cord 
is behind you. 

14.  Remove plug from the mains immediately if cable 

is damaged or cut. 

15.  Make sure you have a secure footing before 

starting operation. 

16.  Hold the tool firmly when using the tool. 
17.  Do not operate the tool at no-load unnecessarily. 
18.  Immediately switch off the motor and unplug the 

mains plug if the cutter should come into contact 
with a fence or other hard object. Check the 
cutter for damage, and if damaged repair 
immediately. 

19.  Before checking the cutter, taking care of faults, 

or removing material caught in the cutter, always 
switch off the trimmer and unplug the mains plug. 

20.  Switch off the trimmer and disconnect and secure 

the mains plug before doing any maintenance 
work. 

21.  When moving the hedge trimmer to another 

location, including during work, always unplug the 
mains plug and put the blade cover on the cutter 
blades. Never carry or transport the trimmer with 
the cutter running. Never grasp the cutter with 
your hands. 

22.  Clean the hedge trimmer and especially the cutter 

after use, and before putting the trimmer into 
storage for extended periods. Lightly oil the cutter 
and put on the cover. The cover supplied with the 
unit can be hung on the wall, providing a safe and 
practical way to store the hedge trimmer. 

23.  Store the hedge trimmer with the cover on, in a 

dry room. Keep it out of reach of children. Never 
store the trimmer outdoors. 

24. 

Do not operate the tool at no-load 
unnecessarily. 

SAVE THESE INSTRUCTIONS. 

 

WARNING: 

DO NOT let comfort or familiarity with product 
(gained from repeated use) replace strict adherence 
to safety rules for the subject product. MISUSE or 
failure to follow the safety rules stated in this 
instruction manual may cause serious personal 
injury. 

 
 

FUNCTIONAL DESCRIPTION 

 

CAUTION: 

• 

Always be sure that the tool is switched off and 
unplugged before adjusting or checking function 
on the tool. 

• 

Put the blade cover on the shear blades before 
adjusting or checking function on the tool. 

Switch action 

Fig.1 

For your safety, this tool is equipped with a triple 
switching system. To turn on the tool, press switch 
trigger B and press switch trigger A or C at the same 
time. Release either one of the two pressed switch 
triggers to turn off. The sequence of switching is 
unimportant as the tool only starts when both switches 
are activated. 

Straight cut 

Fig.2 

To trim the hedge straight, pull switch triggers A and B. 

Vertical cut 

Fig.3 

Cut upwards with both hands pull the switch triggers B 
and C and move it in front of your body. 

ASSEMBLY 

 

CAUTION: 

• 

Always be sure that the tool is switched off and 
unplugged before carrying out any work on the 
tool. 

Engage the extension cord 

 

CAUTION: 

• 

Make sure that the extension cord is unplugged to 
the mains outlet. 

Fig.4 

When engaging the extension cord, secure it to the 
tool's cord with the hook complete. Attach the hook 
about 100 - 200 mm from the extension cord connector. 
This will help prevent unintentional disconnection. 

Waist cord hook 

 

CAUTION: 

• 

Do not attach the holder of waist cord hook to 
other than the extension cord. Do not attach it in a 
position closer to the tool beyond the hook 
complete. Failure to do so may cause an accident 
or personal injury. 

• 

Attach firmly one hook of the hook complete to the 
tool's cord and the other hook of hook complete to 
the extension cord. Working with the tool with a 
sole hook only attached may cause an accident 
and injury. 

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Makita UH5261?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"