Beurer KS 52 - Инструкция по эксплуатации - Страница 6

6

2.1 Starting up
Batteries

Batteries (2 x AA 1.5 V) are necessary to operate the scale. Insert 
them into the battery compartment in the front of the scale before 
operation. Make sure they are correctly inserted. The scale must be 
folded together to replace the batteries. Press the button on the front 
and pull the battery compartment down to open it (Fig. 1). Insert the 
battery correctly (Fig. 2) and close the battery compartment cover by 
pushing upwards. If the display shows “Lo” or the battery symbol, 
it is time to replace the battery.
Spent batteries and rechargeable batteries do not constitute normal household waste! 
They are considered to be toxic waste and, as such, should be disposed of in special 
containers, toxic waste collection points or brought to electrical goods dealers.

Note:

 Batteries containing pollutant substances are marked as follows: 

Pb = Battery contains lead, Cd = Battery contains cadmium, Hg = Battery contains 
mercury.

Setting the time

The scale must be in standby mode (time displayed) to set the time. Press the “Set” button (3 seconds). 
The hours start flashing. Set the hours with the “

쑿

” and 

쑼

” keys and press “Set” to confirm. Then 

the minutes start flashing. Set the minutes with the “

쑿

” and “

쑼

” keys. Press “Set” to confirm and to 

exit the time setting procedure.

Note:

 The time display depends on the specified weight unit. If you have selected g or ml, the time will 

be displayed in 24-hour mode. If you have selected lb or fl.oz, the time will be displayed in 12-hour 
mode with am and pm.

Wall mounting

The wall-mounted kitchen scale must be fastened to a solid wall with the included plastic wall-mount. 
Make sure that there are no pipes or electric wires behind the wall before you start drilling and the 
wall-mount is secured strongly enough for the wall-mounted kitchen scale. Make sure that there is 
enough room at the selected spot for folding down the scale for weighing. Mark the 4 drill holes with 
the wall-mount. Use a spirit level.
Drill the holes at least 40 mm deep, insert the wall plugs and 
screw the wall-mount firmly to the wall – the hooks must point 
upwards. You can also use different screws for different wall 
materials (e.g. wood, plaster).
Place the wall-mounted kitchen scale on the hooks and press it 
firmly into the retainer to click it into place.
You can remove the wall-mounted kitchen scale at any time by 
lifting it up out of the wall-mount.

2.2 Weighing

Fold the scale glass plate down for weighing. Press the “ON/TARA” button in order to switch on the 
scale. 

8888

 appears briefly. As soon as 0 g appears, the scale is ready for measuring. The weight is 

displayed in 1 g graduations. If you wish to use different units, press the “Unit” key. Every time the key 
is pressed, the unit switches from grams (g), pounds and ounces (lb/oz) and fluid ounces (fl.oz).

Weighing without a bowl

Place the item to be weighed directly on the scale. The weight thereof is displayed immediately.

Pb       Cd       Hg

6 mm

40 mm

+

+

–

–

Fig. 1

Fig. 2