Russell Hobbs 25182-56 - Инструкция по эксплуатации - Страница 6

6

SLICING/GRATING

The general assembly steps are shown in figure D.

1.  Fit the spindle to the top of the motor unit.

2.  Lower the bowl on to the motor unit, then turn it clockwise to lock it in place.

3.  Lower the disc over the top of the spindle with the slicing or grating side facing upwards depending 

to whether you want to slice or grate the ingredients. 

4.  Hold the lid with the tube slightly behind the bowl handle, set it on the bowl, then turn it clockwise 

to lock the tab into the top of the handle.

5.  Remove the pusher, and drop the ingredients down the tube.

6.  Replace the pusher, and use it to push the ingredients gently down the tube.

• 

Don’t use fingers or cutlery to push food down the tube – only the pusher.

• 

Don’t let the bowl get more than about half full – stop and empty it.

• 

To remove the lid, turn it anti-clockwise to unlock it, then lift it off.

CARE AND MAINTENANCE

1.  Switch the appliance off (

0

) and unplug it.

2.  Wipe the outside of the motor unit with a clean damp cloth.

3.  Hand wash the removable parts.

4.  If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface finishes. 

5.  The damage should be cosmetic only, and should not affect the operation of the appliance.

`  

You may wash these parts in a dishwasher.

RECYCLING

W

To avoid environmental and health problems due to hazardous substances, appliances 

and rechargeable and non-rechargeable batteries marked with one of these  symbols 

must not be disposed of with unsorted municipal waste. Always dispose of electrical 

and electronic products and, where applicable, rechargeable and non-rechargeable 

batteries, at an appropriate official recycling/collection point.

For recipes, please visit 

http://eu.russellhobbs.com/recipes/