Philips HR7771 - Инструкция по эксплуатации - Страница 7

from the bowl or blender jar, when you empty the bowl or jar and 

when you clean them. Their cutting edges are ver y sharp.

Caution

 - Never switch off the appliance by turning the blender jar, the bowl or 

their lids. Always switch off the appliance by turning the speed 

selector to 0.

 - Switch off the appliance before you detach any accessor y.

 - Unplug the appliance immediately after use.

 - Always unplug the appliance before you reach into the blender jar 

with your fingers or an object (e.g. a spatula).

 - Wait until moving par ts stop running before you remove the lid of 

the bowl or jar.

 - Never use any accessories or par ts from other manufacturers or that 

Philips does not specifically recommend. If you use such accessories 

or par ts, your guarantee becomes invalid.

 - Do not exceed the maximum level indication on the jar and the bowl.

 - Consult the table in this user manual for the correct quantities and 

processing times.

 - Cer tain ingredients may cause discolourations on the surface of the 

par ts. This does not have a negative effect on the par ts. The 

discolourations usually disappear after some time.

 - Never fill the blender jar or food processor bowl with ingredients 

hotter than 80ºC.

 - This appliance is intended for household use only. 

 - Noise level: Lc = 87.5 dB(A). 

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding 

electromagnetic fields (EMF). If handled properly and according to the 

instructions in this user manual, the appliance is safe to use based on 

scientific evidence available today.

safety features
thermal safety cut-out

This appliance is equipped with a thermal safety cut-out that automatically 

cuts off the power supply to the appliance in case of overheating.

If the appliance stops running:

 1 

 Remove the mains plug from the wall socket.

 2 

 Let the appliance cool down for 1 hour.

 3 

 Put the mains plug back into the wall socket.

 4 

 Switch on the appliance again.

Please contact your Philips dealer or an authorised Philips ser vice centre 

if the thermal safety cut-out activates too often.

Built-in safety lock

This feature ensures that you can only switch on the appliance if you 

have assembled the blender jar or the bowl correctly on the motor unit 

and the lid correctly on the blender jar or bowl. If the blender jar or bowl 

and its lid are assembled correctly (see chapter ‘Using the appliance’), the 

built-in safety lock will be unlocked.

Before first use

Thoroughly clean the par ts that come into contact with food before you 

use the appliance for the first time (see chapter ‘Cleaning’).

using the appliance

general

 - The appliance is equipped with a built-in safety lock that prevents it 

from functioning if the blender or food processor is not assembled 

properly.

EnglisH

7