Philips HR7770 - Инструкция по эксплуатации - Страница 7

tips

 - When you shred or granulate soft ingredients, use a low speed to 

prevent the ingredients from turning into puree.

 - Do not let the appliance run too long when you shred (hard) cheese. 

If you do, the cheese becomes too hot, star ts to melt and turns 

lumpy. 

 - Do not use the inser ts to process chocolate. Only use the blade 

unit for this purpose.

Emulsifying disc

You can use the emulsifying disc to whip cream and to whisk eggs, egg 

whites, instant pudding, mayonnaise and sponge cake mixtures.

  1 

 Put the tool holder in the bowl (Fig. 8).

  2 

 Place the emulsifying disc on the tool holder (Fig. 25).

  3 

 Put the ingredients in the bowl.  (Fig. 26)

  4 

 Put the lid on the bowl (1). Turn the lid clockwise (2) to fix it 

(‘click’) (Fig. 27).

  5 

 Put the pusher in the feeding tube.

  6 

 Select the speed that corresponds with the colour of the 

accessory (Fig. 17).

  7 

 When you have finished processing, turn the speed selector to 0 

and unplug the appliance (Fig. 18).

tips

 - Do not use the emulsifying disc to prepare cake mixtures with butter 

or margarine or to knead dough. Use the kneading accessor y for 

these jobs.

 - Make sure the bowl and the emulsifying disc are dr y and free from 

grease when you whisk egg whites. Make sure the egg whites are at 

room temperature.

EnglisH

7

slicing, shredding and granulating inserts

Never process hard ingredients like ice cubes with the inserts.

The cutting edges of the inserts are very sharp. Do not touch them.

  1 

 Put the tool holder in the bowl (Fig. 8).

  2 

 Place the metal shredding, slicing or granulating insert in the insert 

holder.

 - Place the opening of the inser t over the shaft of the inser t 

holder (Fig. 19).

 - Push the opening of the inser t over the projection on the 

shaft (Fig. 20).

 - Press the inser t onto the inser t holder until it locks in position with 

a click (Fig. 21).

  3 

 Place the insert holder with insert on the tool holder (Fig. 22).

  4 

 Put the lid on the bowl (1). Turn the lid clockwise (2) to fix it 

(‘click’) (Fig. 23).

Note: Make sure the projection on the lid locks into the slot of the bowl 

handle.

  5 

 Put the ingredients in the feeding tube.  (Fig. 24)

 - Pre-cut large ingredients into chunks that fit in the feeding tube. 

 - Fill the feeding tube evenly for the best results. 

 - When you have to process a large amount of ingredients, 

process small batches and empty the bowl between batches.

  6 

 Select the speed that corresponds with the colour of the 

accessory (Fig. 17).

  7 

 Press the pusher lightly onto the ingredients in the feeding tube.

  8 

 When you have finished processing, turn the speed selector to 0 

and unplug the appliance (Fig. 18).