Philips HR7758 - Инструкция по эксплуатации - Страница 18

E N G L I S H

1 8

C

4

Take out the two gearwheels and clean
them and the beater in hot water with
some washing-up liquid.

To reassemble the balloon beater :

C

5

First insert the small gearwheel into the
housing, then insert the larger gearwheel.

C

6

Close the housing by snapping the bottom
part onto the top part. Make sure both
ends snap home with a click.

7

Insert the beater.

Thorough cleaning of the adjustable slicing
disc

C

1

Turn the adjusting knob to the right and
pull the slicing insert out of the disc.

The disc, the slicing inser t and the adjusting knob
can be cleaned in hot water with some washing-
up liquid or in the dishwasher.

Cleaning the meat mincer

The par ts of the meat mincer are not dishwasher
proof!

1

2

1

First remove any meat left behind in the
cutter housing by passing pieces of bread
through the cutter housing.

2

Switch off the appliance and unplug it.

C

3

Remove the pusher and the tray.

C

4

Unscrew the screw ring and remove the
grinding disc, the cutter unit and the worm
shaft.

C

5

Remove the cutter housing from the gear
housing by pressing the release button and
turning it to the right.

C

6

Detach the gear housing by turning it to
the right.

C

7

Clean all parts that have come into contact
with meat with hot water and some
washing-up liquid immediately after use.

8

Rinse them with clean hot water and dry
them immediately with a tea towel.