HOTTEK HT-977-100 - Инструкция по эксплуатации - Страница 18

ENG

18

machine on again. 

•  Do not block the ventilation openings on the motor unit body during the unit 

operation; this may lead to the electric motor overheating. 

•  Make  sure  that  the  electronic  scale  are  installed  properly,  otherwise  the 

kitchen  machine  will  no  switch  on.  If  the  electronic  scale  is  placed  on  the 

blender drive, the appliance can be operated with the mixing bowl only.

•  Handle your electronic scale with care, as it is a precision instrument, do not 

subject it to high or low temperatures, high humidity, never expose it to direct 

sunlight and do not drop it. 

•  Avoid getting of liquids into the scale body, this appliance is not waterproof. 

Do  not  leave  or  use  the  scale  in  a  room  with  high  humidity  (above  80%), 

make  sure  that  the  scale  body  does  not  come  into  contact  with  water  or 

other liquids as this may cause failure of scale indications or its damage. 

•  Do  not  put  products  on  the  weighing  platform  if  their  weight  exceeds  the 

maximal capacity of the scale 5 kg. 

•  Uninterrupted work time of device should be no more than 2 minutes. Make 

breaks, with duration of no less than 2 minutes, between working cycles.

•  When using the appliance, cool down all hot dishes. Maximal temperature of 

dishes must not be higher than 60°С.

•  During first use of the device, carefully wipe blenders blades with wet cloth.
•  Use appliance on a flat, stable surface.
•  Do not overfill the bowl for food grinding.
•  Cutting blades of knife are sharp and dangerous. Treat knife very carefully!
•  In case of troubles with knife spinning turn off the appliance, and carefully 

remove all products which hamper knife spin. 

•  You  should  only  remove  products  from  shredding  container  after  knife 

rotation fully stops.

•  Do  not  touch  rotating  parts  of  appliance.  Do  not  let  hair  or  clothing  pieces 

touch the rotation sphere of blender blades.

•  Do not leave the appliance unattended.
•  The appliance is not intended for actuation of an external timer or separate 

remote control system.

•  Installation  of  this  appliance  is  not  provided,  since  it  is  delivered  ready  for 

service.

•  The special transportation regulations do not apply to this appliance. When 

transporting the unit, use the original packaging. When transporting, avoid 

drops,  shocks  and  other  mechanical  effects  on  the  appliance,  as  well  as