Bosch MultiTalent 3 MCM3PM386 - Инструкция по эксплуатации - Страница 26

26 

en

Cleaning and servicing 

Note:

 The longer the appliance remains 

switched on, the finer the ingredients are cut. 

Recommendations on using the accessories 

can be found in the section “Recipes/ 

Ingredients/Processing”.

After using the appliance

■

Set the rotary switch to 

P

.

■

Remove mains plug.

■

Rotate universal cutter anti-clockwise and 

remove.

■

Turn universal cutter over (blade insert 

face up).

■

Loosen blade insert clockwise (

l

) and 

remove from the universal cutter jug.

■

Empty jug.

■

Clean all parts, see “Cleaning and 

servicing”.

Cleaning and servicing

The appliance requires no maintenance. 

Thorough cleaning protects the appliance 

from damage and keeps it functional.

An overview of cleaning the individual parts 

can be found in 

Fig. 

G

.

W

Risk of electric shock

Never immerse the base unit in water or 

place under running water.

Warning! 

Surfaces may be damaged. Do not use 

abrasive cleaning agents.

Note:

 If processing e.g. carrots and red 

cabbage, the plastic parts will become 

discoloured by a red film which can be 

removed with a few drops of cooking oil.

Cleaning the base unit

■

Remove mains plug.

■

Wipe the base unit with a damp cloth. 

If required, use a little detergent.

■

Then dry the base unit.

Cleaning the bowl and 

accessories

W

Risk of injury from sharp blades!

Do not touch blades of the universal blade 

with bare hands. When not in use, always 

store the universal blade in the blade guard. 

Clean them with a brush. Do not grip the 

sharp blades or edges of the cutting discs. 

Grip the discs by the plastic part in the centre 

only!
All parts are dishwasher-proof. Do not 

wedge plastic parts in the dishwasher as 

they could warp.

Cleaning the blender / 

universal cutter

W

Risk of injury from sharp blades!

Do not touch blades of the blade insert with 

bare hands. Clean them with a brush.
The blender jug (without blade insert), lid 

and funnel are dishwasher-proof.

Do not clean the blade insert in the dish-

washer, but under running water (do not 

soak in water). Remove seal for cleaning.

Troubleshooting

W

Risk of injury!

Before rectifying a fault, pull out the 

mains plug.

Fault:

Appliance does not start or appliance 

switches off during operation.

Possible cause:

Bowl or lid or the accessory has not been 

attached correctly or has become detached. 

Remedial action:

■

Set the rotary switch to 

P

.

■

Correctly attach bowl/lid or accessory and 

screw on all the way.

■

Switch the appliance on again.

Important information

If the fault cannot be eliminated, please 

contact customer service (see customer 

service addresses at the end of this booklet).

Storage

Fig. 

H

The tools can be stored in the bowl to save 

space.