Timberk On/Off AC TIM 60LC CF5 - Инструкция по эксплуатации - Страница 8

www.timberk.com • Electric air conditioner

8

7. OPERATING MODES

AUTO mode

The auto mode on and off is turned on and off with the use of the button 

“MODE” on the remote control board.
1. While working in the AUTO mode, a microprocessor will automatically 

select COOL, FAN, HEAT or DRY modes based on the difference between 

actual and preset air temperature indoors.
2. If the AUTO mode does not provide comfort conditions, select the mode 

manually.

COOL, HEAT and FAN

1. Turn the conditioner on pressing the «ON/OFF» button.
2. Pressing the «MODE» button, select COOL, HEAT or FAN mode 

manually.
3. Pressing the «TEMP» button (up-down), set the desired air temperature 

indoors (except for FAN mode).
4. Pressing the «FAN SPEED» button on the remote control board, select 

the fan rotation speed: AUTO, LOW, MIDDLE, HIGH, and the conditioner 

will start working in accordance with the selected setting.
5. To turn the conditioner off, press the «ON/OFF» button once again.
In the FAN mode air temperature indoors is not set

DRY

Turn the conditioner on pressing the «ON/OFF» button. Pressing the 

«MODE» button, select the DRY mode. The conditioner will start working 

in the set mode. To turn the conditioner off, press the «ON/OFF» button 

once again.

«TURBO» mode

When pressing the «TURBO» button on the remote control board, the 

conditioner will start working in turbo mode  for maximum cooling (in cool 

mode) or for maximum heating (in heat mode).

TIMER mode

Procedure of timing:
If the conditioner is off, then press the “TIMER” button to activate the 

automatic turning on. Pressing this button once again, set the time for
turning the conditioner on in the set time interval. To cancel the timer mode, 

press the “TIMER” button once again.
 If the conditioner is working, then press the “TIMER” button to activate 

the automatic turning off. Pressing this button once again, set the time for 

turning the conditioner off in the set time interval. To cancel the timer mode, 
press the “TIMER” button once again

.

«SLEEP» mode

Using this button, you may turn the sleep mode on and off. In this mode the 

fan rotation speed will be low.
When the function «SLEEP», if the air conditioner operates in cooling mode, 

set temperature will increase1°C in 2 hours and 2°C over 7 hours.When the 

function «SLEEP», if the air conditioner operates in heating mode, the set 

temperature will decrease2°C in 1 hour and another 2°C within 2 hours of 

work. After 8 hours in SLEEP mode air conditioner turns off.
Regulation of treated air flow direction
Regulating the position of deflectors (blinds), set the direction of treated 

air flow ensuring uniform distribution of temperature and the most comfort 

conditions in the room. To change the position of deflectors, use the 

«SWING» buttons.