Timberk AC TIM 30H S21 - Инструкция по эксплуатации - Страница 8

www.timberk.com • Electric air conditioner

8

«SUPER» mode (TURBO) 

When pressing the «TURBO» button on the remote control board, the 

conditioner will start working in turbo mode – for maximum cooling (in cool 

mode) or for maximum heating (in heat mode).

TIMER mode

Procedure of timing:
– If the conditioner is off, then press the “TIMER” button to activate the 

automatic turning on. Pressing this button once again, set the time for 

turning the conditioner on in the set time interval. To cancel the timer mode, 

press the “TIMER” button once again.
–If the conditioner is working, then press the “TIMER” button to activate 

the automatic turning off. Pressing this button once again, set the time for 

turning the conditioner off in the set time interval. To cancel the timer mode, 

press the “TIMER” button once again.

«SLEEP» mode

Button «SLEEP» (Night Care). Using this button, you may turn the sleep 

mode on and off. In this mode, if working for cooling, the conditioner will 

increase temperature by 1 °С an hour  from the specified one within two 

hours. If working for heating, the conditioner will decrease temperature by 

1 °С an hour  from the specified one within two hours. After 10 hours of 

operation the conditioner will turn off automatically.

Regulation of treated air flow direction

Regulating the position of deflectors (blinds), set the direction of treated 

air flow ensuring uniform distribution of temperature and the most comfort 

conditions in the room. To change the position of deflectors, use the 

«SWING» button.

AUTO mode (SMART)

The auto mode is turned on and off with the use of the button “MODE” on 

the remote control board.
1. While working in the AUTO mode, a microprocessor will automatically 

select COOL, FAN, HEAT or DRY modes based on the difference between 

actual and preset air temperature indoors.
2. If the AUTO mode does not provide comfort conditions, select the mode 

manually. In automatic mode, depending on air temperature in the room, 

the conditioner will select needed temperature parameters of its operation 

in the following order:

7. OPERATING MODES

Temperature indoors

Automatic mode sele ction

Automatically maintained temperature

if <20° С

then HEAT mode shall be turned on

23° С

if <20° С - 26° С

then DRY mode shall be turned on

18° С

if <26° С

then COOL mode shall be turned on

23° С

ASmart mode allows changing threshold of switching from mode to mode. 

During operation in Smart mode you see «-» on the display. Press keys 

Temp +/-. «-» will change by +(-) 2. The range shift of this threshold 
ASmart mode allows changing threshold of switching from mode to mode. 

During operation in Smart mode you see «-» on the display. Press keys 

Temp +/-. «-» will change by +(-) 2. The range shift of this threshold is within 

-2...+2 of default temperatures.

COOL, HEAT and FAN

1. Turn the conditioner on pressing the «ON/OFF» button.
2. Pressing the «MODE» button, select COOL, HEAT or FAN mode 

manually.
3. Pressing the «TEMP» button (up-down), set the desired air temperature 

indoors (except for FAN mode).
4.Pressing the «FAN SPEED» button on the remote control board, select 

the fan rotation speed: AUTO, LOW, MIDDLE, HIGH, and the conditioner 

will start working in accordance with the selected setting. In the Smart 

mode fan speed automatically selected.
5.To turn the conditioner off, press the «ON/OFF» button once again.

In the FAN mode air temperature indoors is not set.

DRY

Turn the conditioner on pressing the «ON/OFF» button. Pressing the 

«MODE» button, select the DRY mode. The conditioner will start working 

in the set mode. To turn the conditioner off, press the «ON/OFF» button 

once again.