Scarlett RRI 09C PM3 - Инструкция по эксплуатации - Страница 9

9

ENG

7. POWER button

Used to turn on / off the device.

SLEEP mode

This mode can be enabled using the «SLEEP» and «     » buttons.

COOL mode

Press «MODE» until the «COOL» indicator lights. Click SETTINGS «     » button or «     » to select the desired room 

temperature. The temperature can be set in the range 16 °C−31 °C.

Press the «FAN» button to select the fan speed.

DRY mode

Press «MODE» until the «DRY» indicator lights. In this mode, you can not select or adjust the fan speedtemperature.

Close windows and doors to achieve the best drying effect. Do not put the duct to window.

FAN mode

Press «MODE» until the «FAN» indicator lights. Press the «FAN» button to select the fan speed. You can not adjust

temperature. Do not put the duct to window.

Instructions in the condensation

1. When filling the tank, switch off the condensation of air conditioning and turn off the power.

Note: Move the device carefully to avoid spillage of water in the bottom of the case

2. Place the water container behind the outlet at the rear of the chassis.

3. Unscrew the drain cap and pull out the plug, the water will automatically flow into the water tank.

Note:

1. Hold the drain plug cover, and the water properly.

2. During drainage, the housing may be tilted slightly backwards.

3. When the water is drained, stick water plug and tighten the drain cap.

Fig. 12