Panasonic CS/CU-E18RKD - Инструкция по эксплуатации - Страница 7

7

English

See "To learn more..." for details.

How to use

ECONAVI

To optimise energy saving

NANOE-G

To purify the air

NANOE-G

• nanoe-G starts automatically when the unit is turned on 

with 

OFF/ON

 .

• Can be activated even when the unit is turned off. In this 

condition, the unit will operate as a fan with AUTO fan 

speed and 

fl

 ap swing.

Multi

• This operation cannot be performed or will be 

stopped if other indoor unit is activating HEAT 

mode.

To deactivate viruses/bacteria on the 

fi

 lter

NANOE-G

POWER

• After the unit is turned off, the nanoe-G in-

fi

 lter 

deactivation may activate up to 150 minutes. Turning on 

the unit cancels this operation.

• To disable this operation in the future, press and hold 

NANOE-G

 until a short beep sound is heard. This will not 

disable the nanoe-G to purify the air.

• To restore the nanoe-G in-

fi

 lter deactivation, press and 

hold 

NANOE-G

 until a long beep sound is heard. 

AIR SWING

To adjust air

fl

 ow direction

(Remote control display)

• Keeps the room ventilated.

• In COOL/DRY mode, if AUTO is set, the 

fl

 aps swings left/

right and up/down automatically.

• In HEAT mode, if AUTO is set, the horizontal 

fl

 ap is 

fi

 xed 

at the predetermined position. The vertical 

fl

 ap swings left/

right after the temperature rises.

• In i AUTO-X mode, if AUTO is set, the horizontal 

fl

 ap is 

fi

 xed at the lower position and shift to the upper position 

after reaches set temperature. 

The vertical 

fl

 ap movement depends on human activity 

sensor. If manual is set, the horizontal and vertical 

fl

 ap are 

fi

 xed at the predetermined position.

• Do not adjust the 

fl

 ap by hand.

Note

ECONAVI

 , 

QUIET

 , 

AUTO

COMFORT

 , 

NANOE-G

• Can be activated in HEAT, COOL and DRY 

mode and can be cancelled by pressing the 
respective button again.

i AUTO-X

 , 

ECONAVI

 , 

QUIET

 , 

AUTO

COMFORT

• Cannot be selected at the same time.

Auto Restart Control

• If power is resumed after a power failure, the 

operation will restart automatically after a period 
of time with previous operation mode and air

fl

 ow 

direction. 

• This control is not applicable when TIMER is set.

To set the timer

2 sets of ON and OFF timers are available 
to turn ON or OFF the unit at different preset 
times.

ON

OFF

SET

CANCEL

1

2

3

TIMER

CANCEL

3

TIMER

1

2

3

1

Select ON or OFF 
timer

Example: 
OFF at 22:00

• Each time pressed:

OFF

Cancel

2

Set the time

2

3

Con

fi

 rm

SET

TIMER

• To cancel ON or OFF timer, press 

ON

 or 

OFF

to select respective   or   then press 

CANCEL

.

• If timer is cancelled manually or due to power 

failure, you can restore the timer again by 
pressing 

ON

 or 

OFF

 to select respective   or 

 then press 

SET

.

• The nearest timer setting will be displayed and 

will activate in sequence.

• When ON Timer is set, the unit may start 

earlier (up to 35 minutes) before the actual 
set time in order to achieve the desired 
temperature on time.

• Timer operation is based on the clock set in 

the remote control and repeats daily once set. 
For clock setting, please refer to Quick guide.