Mitsubishi Electric MS-GF60VA - Инструкция по эксплуатации - Страница 5

En-4

Operation indicator lamp

Emergency operation

When the remote controller cannot be used...

Emergency  operation  can  be  activated  by  pressing  the  emergency  operation 

switch (E.O.SW) on the indoor unit.

Each  time  the  E.O.SW  is  pressed,  the  operation  changes  in 

the following order:

1

Press 

 to start the operation.

2

Press 

 to select operation mode. Each press 

changes mode in the following order:

3

Press   or   to set the temperature.

Each press raises or lowers the temperature by 1°C.

Press 

 to stop the operation.

•  The same setting is selected the next time by simply pressing

.

Operation indicator lamp

The operation indicator lamp shows the operation state of the unit.

Indication

Operation state

Room temperature

The unit is operating to reach the set 

temperature

About  2°C  or  more  

away from set tem-

perature

The room temperature is approach-

ing the set temperature

About 1 to 2°C from 

set temperature

  Lighted 

Not lighted

Auto restart function

If a power failure occurs or the main power is turned off during operation, “Auto 

restart  function”  automatically  starts  operation  in  the  same  mode  as  the  one 

set with the remote controller just before the shutoff of the main power. When 

timer is set, timer setting is cancelled and the unit starts operation when power 

is resumed.

If you do not want to use this function, please consult the service repre-

sentative because the setting of the unit needs to be changed.

S

ELECTING OPERATION MODES

Set temperature : 24°C

Fan speed : Medium

Horizontal vane : Auto

  (I FEEL) 

(COOL) 

(DRY) 

(FAN)

Note:

The  fi rst  30  minutes  of  operation  is  test  run.  Temperature 

control does not work, and fan speed is set to High.

 I FEEL mode

The  unit  selects  the  operation  mode  according  to  the  room  temperature 

when I FEEL is selected. When the room temperature is higher than 25°C, 

COOL  is  selected  (set  temperature:  24°C).  When  the  room  temperature 

is lower than 25°C, DRY is selected. However, when operation is stopped 

and then started within 2 hours, the mode which has been selected previ-

ously is operated.

Note: 

During COOL operation, the set temperature may not be changed when 

the room temperature is more than 2°C higher than the set temperature. 

In this case, please wait until the room temperature drops to within 2°C of 

the set temperature.

 COOL  mode

Enjoy cool air at your desired temperature. 

  DRY mode

Dehumidify your room. The room may be cooled slightly. 

Temperature cannot be set during DRY mode.

  FAN mode

Circulate the air in your room.

Emergency COOL

Stop

JG79A935H02_en.indd   4

2016/07/01   14:08:04